Find Research outputs

2025

Development of C. albican Anti-attachment Inkjet 3D Printing Ink, via High Throughput Screening

Yong, L. X., Zhou, Z., Vallières, C., He, Y., Crucitti, V. C., Alexander, M. R., Avery, S., Wildman, R. & Irvine, D., 2025, Computational and Experimental Simulations in Engineering - Proceedings of ICCES 2024 — International Conference on Computational and Experimental Engineering and Sciences ICCES. Zhou, K. (ed.). Springer Science and Business Media B.V., p. 437-452 16 p. (Mechanisms and Machine Science; vol. 175 MMS).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2024

Uncertainty quantification for damage detection in 3D printed pure PLA auxetic lattice structure using ultrasonic guided waves and Flipout probabilistic convolutional neural network

Lu, H. Y., Farrokhabadi, A., Rauf, A., Talemi, R., Gryllias, K. & Chronopoulos, D., 2024, Proceedings of ISMA 2024 - International Conference on Noise and Vibration Engineering and USD 2024 - International Conference on Uncertainty in Structural Dynamics. Desmet, W., Pluymers, B., Moens, D. & del Fresno Zarza, J. (eds.). KU Leuven, Departement Werktuigkunde, p. 4352-4363 12 p. (Proceedings of ISMA 2024 - International Conference on Noise and Vibration Engineering and USD 2024 - International Conference on Uncertainty in Structural Dynamics).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2023

Effect of multiple combination modes of reactive components on the response of electromagnetic vibration energy harvester

Zhong, R., Thein, C. K., Halim, D. & Xu, J., 2023, Proceedings of ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2023. American Society of Mechanical Engineers, v001t07a010. (Proceedings of ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2023).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Free Vibration Analysis of Laminated Composite Plate with a Cut-Out

Zhou, C., Zhu, Y., Yi, X. & Yang, J., 2023, Recent Trends in Wave Mechanics and Vibrations - Proceedings of WMVC 2022. Dimitrovová, Z., Gonçalves, R., Dimitrovová, Z., Biswas, P. & Silva, T. (eds.). Springer Science and Business Media B.V., p. 930-938 9 p. (Mechanisms and Machine Science; vol. 125 MMS).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Investigation of the Improvement of Airfoil Aerodynamic Performance by Using a Novel Mechanism to Adjust Different Cant Angles

Widjaja, W., Long, S., Yang, X. & Adjei, R. A., 2023, 2023 14th International Conference on Mechanical and Aerospace Engineering, ICMAE 2023. Institute of Electrical and Electronics Engineers Inc., p. 382-388 7 p. (2023 14th International Conference on Mechanical and Aerospace Engineering, ICMAE 2023).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

ON THE RESONANCE/BANDWIDTH-COUPLING RELATIONSHIP OF ELECTROMAGNETIC VIBRATION ENERGY HARVESTER WITH A NON-VARYING MAGNETIC FLUX DENSITY

Toluwaloju, T. I., Thein, C. K. & Halim, D., 2023, Proceedings of ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2023. American Society of Mechanical Engineers, v001t07a009. (Proceedings of ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2023).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Vibration Analysis of Laminated Composite Panels with Various Fiber Angles

Zhu, C., Li, G. & Yang, J., 2023, Recent Trends in Wave Mechanics and Vibrations - Proceedings of WMVC 2022. Dimitrovová, Z., Gonçalves, R., Dimitrovová, Z., Biswas, P. & Silva, T. (eds.). Springer Science and Business Media B.V., p. 948-956 9 p. (Mechanisms and Machine Science; vol. 125 MMS).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Vibration Power Dissipation in a Spring-Damper-Mass System Excited by Dry Friction

Chao, C., Shi, B., Yang, J. & Wiercigroch, M., 2023, Recent Trends in Wave Mechanics and Vibrations - Proceedings of WMVC 2022. Dimitrovová, Z., Gonçalves, R., Dimitrovová, Z., Biswas, P. & Silva, T. (eds.). Springer Science and Business Media B.V., p. 957-965 9 p. (Mechanisms and Machine Science; vol. 125 MMS).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Vibration Power Flow and Wave Transmittance Analysis of Inerter-Based Dual-Resonator Acoustic Metamaterial

Liu, Y., Chronopoulos, D. & Yang, J., 2023, Recent Trends in Wave Mechanics and Vibrations - Proceedings of WMVC 2022. Dimitrovová, Z., Gonçalves, R., Dimitrovová, Z., Biswas, P. & Silva, T. (eds.). Springer Science and Business Media B.V., p. 966-975 10 p. (Mechanisms and Machine Science; vol. 125 MMS).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

2020

Effects of former surface treatment on natural rubber latex deposition

Hoo, K. W. I. S., Yu, L. J., Shyam, K. S. J., Ong, A. C. & Lai, N. Y. G., 2020, 7th Asia Conference on Mechanical and Materials Engineering. Es-Said, O. S. (ed.). Trans Tech Publications Ltd, p. 223-228 6 p. (Materials Science Forum; vol. 975 MSF).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Fish scale collagen functionalized thermo-responsive nanofibres

Tshai, K. Y., Chin, M. H., Lim, S. S., Loh, H. S., Yong, E. H. N. & Nuge, T., 2020, Engineering and Innovative Materials VIII. Yahaya, M. & Hsieh, H.-C. (eds.). Trans Tech Publications Ltd, p. 189-194 6 p. (Key Engineering Materials; vol. 846 KEM).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Screening of metal oxides to promote CO₂ adsorption performance over polyethyleneimine incorporated solid adsorbents

Yang, M., Xinyun, W., Yuxin, Y., Shuai, L., Tao, W. & Heng, P. C., 2020, Materials Science and Engineering: Technological Advances and Research Results. Liu, N. (ed.). Trans Tech Publications Ltd, p. 93-100 8 p. (Materials Science Forum; vol. 1005 MSF).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

2018

Mixed sensitivity ∞ controller design for force tracking control of electro-hydraulic servo system

Ijaz, S., Javaid, U., Linyan, Ashraf, M. A. & Khan, Y. A., 9 Mar 2018, Proceedings of 2018 15th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2018. Institute of Electrical and Electronics Engineers Inc., p. 291-297 7 p. (Proceedings of 2018 15th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2018; vol. 2018-January).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

The relation between static and dynamic shakedown limits of slab track substructures under moving train loads

Wang, J. & Liu, S., 2018, Springer Series in Geomechanics and Geoengineering. Wu, W. & Yu, H.-S. (eds.). Springer Verlag, p. 1742-1745 4 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2017

A damping factor based particle swarm optimization approach

He, M., Liu, M., Jiang, X., Wang, R. & Zhou, H., 2 Jul 2017, Proceedings of 2017 9th International Conference On Modelling, Identification and Control, ICMIC 2017. Institute of Electrical and Electronics Engineers Inc., p. 13-18 6 p. (Proceedings of 2017 9th International Conference On Modelling, Identification and Control, ICMIC 2017; vol. 2018-March).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Determination of creep damage properties from a miniature three point bending specimen using an inverse approach

Lu, J., Campbell-Brown, A., Tu, S. T. & Sun, W., 2017, Small Sample Test Technique. Guan, K., Matocha, K. & Xu, T. (eds.). Trans Tech Publications Ltd, p. 260-272 13 p. (Key Engineering Materials; vol. 734 KEM).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Shape adaptive structures by 4D printing

Hu, G. F., Damanpack, A. R., Bodaghi, M. & Liao, W. H., 2017, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies. American Society of Mechanical Engineers, (ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2017; vol. 1).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

System setup consideration for range gated imaging

Chua, S. Y., Guo, N., Tan, C. S., Chew, K. W., Chang, S. J. & Wang, X., 2017, Conference on Lasers and Electro-Optics/Pacific Rim, CLEOPR 2017. Optica Publishing Group (formerly OSA), s2061. (Optics InfoBase Conference Papers; vol. Part F122-CLEOPR 2017).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

The high temperature creep properties of a thermally sprayed CoNiCrAlY coating via small punch creep testing

Jackson, G. A., Chen, H., Sun, W. & McCartney, D. G., 2017, Small Sample Test Technique. Guan, K., Matocha, K. & Xu, T. (eds.). Trans Tech Publications Ltd, p. 37-48 12 p. (Key Engineering Materials; vol. 734 KEM).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

2016

Advanced materials for extreme environment aerospace actuators

Papini, L., Gerada, C., Kampitsis, G. & Kladas, A., 2016, Applied Electromagnetic Engineering for Advanced Materials from Macroto Nanoscale. Mamalis, A. G., Kladas, A. G., Enokizono, M., Enokizono, M. & Lazarov, V. (eds.). Trans Tech Publications Ltd, p. 119-124 6 p. (Materials Science Forum; vol. 856).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Development of a quantifiable approach in monitoring the fatigue cracks using digital image correlation

Khoo, S. W., Karuppanan, S. & Tan, C. S., 2016, Science and Engineering of Materials II: Materials and Technology for a Sustainable Future. Tin, C.-C., Tin, C.-C. & Johan, M. R. (eds.). Trans Tech Publications Ltd, p. 211-215 5 p. (Key Engineering Materials; vol. 701).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

On the optimization of compliant actuators for passive-active control of vibration transmissibility

Mareta, S., Halim, D. & Popov, A. A., 2016, Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD2016 - International Conference on Uncertainty in Structural Dynamics. Sas, P., Moens, D. & van de Walle, A. (eds.). KU Leuven, Departement Werktuigkunde, p. 193-203 11 p. (Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD2016 - International Conference on Uncertainty in Structural Dynamics).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Preparation and characterization of structural damping composites toughened by polyamide nonwoven fabrics

Ni, N. N., Wen, Y. F., He, D. L., Guo, M. C. & Yi, X. S., 2016, Functional and Functionally Structured Materials. Han, Y., Wu, Y., Li, G., Pan, F., Liu, X. & Fan, R. (eds.). Trans Tech Publications Ltd, p. 189-195 7 p. (Materials Science Forum; vol. 848).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

2015

Analyses on heat transfer and fluid flowing in a traction motor used in high-speed CRH

Cao, J., Li, W., Zhang, Y., Zhang, X., Jiang, Y. & He, Y., 4 May 2015, 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles, ESARS 2015. IEEE Computer Society, 7101441. (Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS; vol. 2015-May).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

A review on turn-turn short circuit fault management

Arumugam, P., Gerada, C., Hamiti, T., Hill, C. & Bozhko, S., 4 May 2015, 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles, ESARS 2015. IEEE Computer Society, 7101528. (Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS; vol. 2015-May).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

15 Citations (Scopus)

Design considerations for high performance traction machines: Aiming for the FreedomCar 2020 targets

Walker, A., Galea, M., Gerada, C., Mebarki, A. & Gerada, D., 4 May 2015, 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles, ESARS 2015. IEEE Computer Society, 7101451. (Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS; vol. 2015-May).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

12 Citations (Scopus)

Morphing wing design for fixed wing aircraft

Yang, J., Sartor, P., Cooper, J. E. & Nangia, R. K., 2015, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics Inc., (56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Selection of slot-pole combination of permanent magnet machines for aircraft actuation

Dusek, J., Arumugam, P., Hamiti, T. & Gerada, C., 4 May 2015, 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles, ESARS 2015. IEEE Computer Society, 7101531. (Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS; vol. 2015-May).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

State space model of a modular speed-drooped system for high reliability integrated modular motor drives

Galassini, A., Costabeber, A., Gerada, C., Buticchi, G. & Barater, D., 4 May 2015, 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles, ESARS 2015. IEEE Computer Society, 7101527. (Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS; vol. 2015-May).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

2014

A biodegradable polycaprolactone based ink developed for 3D inkjet printing

He, Y., Kilsby, S., Tuck, C., Wildman, R., Christie, S., Yang, H. & Edmonson, S., 2014, SAMPE Seattle 2014 International Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Alignment of discontinuous recycled carbon fibre

Wong, K. H., Turner, T. A. & Pickering, S. J., 2014, SAMPE Seattle 2014 International Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Fault tolerant PWM generation with doubleredundant logic

Troni, F., Concari, C., Toscani, A., Buticchi, G. & Franceschini, G., 2014, Advanced Materials and Information Technology Processing. WITPress, p. 495-502 8 p. (WIT Transactions on Engineering Sciences; vol. 87).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Modeling of polyurethane's shape memory effects and recovery time under different recovery temperatures

Luo, L., Jia, Y., Wang, X., Wang, Z., Gao, J. & Yi, X., 2014, Recent Highlights in Advanced Materials. Trans Tech Publications Ltd, p. 95-100 6 p. (Key Engineering Materials; vol. 575-576).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Predicting polyurethane shape memory behaviors in stress-controlled situations using a viscoelastic model

Wang, Z., Luo, L., Jiac, Y., Gao, J. & Yi, X., 2014, Recent Highlights in Advanced Materials. Trans Tech Publications Ltd, p. 101-106 6 p. (Key Engineering Materials; vol. 575-576).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

2013

Design of loboid gear pairs using involute discretization

Spitas, V. & Spitas, C., 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 417-425 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Dynamical simulation and calculation of the load factor of spur gears with indexing errors and profile modifications for optimal gear design

Spitas, C., Spitas, V. & Rajabalinejad, M., 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 183-196 14 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Low cost, high value reuse of recovered carbon fibres

Pickering, S. J., Turner, T. A., Wong, K. H. & Warrior, N. A., 2013, SAMPE 2013 Conference and Exhibition: Education and Green Sky - Materials Technology for a Better World. p. 433-445 13 p. (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Multi-response parameters optimisation for energy-efficient injection moulding process via dynamic shainin DOE method

Yin, K. H., Choo, H. L., Halim, D. & Rudd, C., 2013, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 1669-1682 14 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Towards optimum involute gear design by combining addendum and thickness modifications

Spitas, V. & Spitas, C., 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 173-181 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

2012

Simulation study of cutting forces, stresses and temperature during nanometric cutting of single crystal silicon

Goel, S., Luo, X., Reuben, R. L., Rashid, W. B. & Sun, J., 2012, Precision Machining VI. Trans Tech Publications Ltd, p. 223-228 6 p. (Key Engineering Materials; vol. 496).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Single point diamond turning of single crystal silicon carbide: Molecular dynamic simulation study

Goel, S., Luo, X., Reuben, R. L., Rashid, W. B. & Sun, J., 2012, Precision Machining VI. Trans Tech Publications Ltd, p. 150-155 6 p. (Key Engineering Materials; vol. 496).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

14 Citations (Scopus)

2011

Alignment of discontinuous recycled carbon fibre

Wong, K. H., Pickering, S. J., Turner, T. A. & Warrior, N. A., 2011, 2011 SAMPE Spring Technical Conference and Exhibition - State of the Industry: Advanced Materials, Applications, and Processing Technology. (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

A new self healing method in composite laminates using the hollow glass fiber

Nademi, M., Mozaffari, A. & Farrokhabadi, A., 2011, Composite Science and Technology. Trans Tech Publications Ltd, p. 548-551 4 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Feasibility study of small features extraction for 3D image rendering

Ong, C. W., Wang, X., Lee, K. Y., Tan, C. S. & Ooi, J. B., 2011, 50th Annual Conference of the British Institute of Non-Destructive Testing 2011, NDT 2011 Held in conjunction with the Materials Testing Exhibition, MT 2011. British Institute of Non-Destructive Testing, p. 155-166 12 p. (50th Annual Conference of the British Institute of Non-Destructive Testing 2011, NDT 2011 Held in conjunction with the Materials Testing Exhibition, MT 2011).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Movement realization of a novel fused biconical taper system based on electrical heater

Shuai, C., Gao, C., Nie, Y. & Peng, S., 2011, Optoelectronic Materials. Huang, Y. M. (ed.). Trans Tech Publications Ltd, p. 637-640 4 p. (Materials Science Forum; vol. 663-665).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Progressive damage analyses of composite laminates exhibiting free edge effects using a new micro-meso approach

Hosseini-Toudeshky, H., Farrokhabadi, A. & Mohammadi, B., 2011, Composite Science and Technology. Trans Tech Publications Ltd, p. 263-267 5 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

The thickness and the inerior quality of composite panel in the vacuum assisted resin transfer molding process

Li, Y., Yi, X. & Tang, B., 2011, Advanced Structural Materials. Trans Tech Publications Ltd, p. 468-473 6 p. (Materials Science Forum; vol. 686).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2010

Buckling and post-buckling of a pumpkin balloon

Xu, Y., Chen, M. Z. Q. & Chen, W. J., 2010, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2010-2671. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Defects detection in magnetic particle inspection application using image processing techniques

Wang, X., Tan, C. S., Wong, B. S., Low, Y. G. & Tui, C. G., 2010, Non-Destructive Testing Conference 2010, NDT 2010. British Institute of Non-Destructive Testing, p. 266-278 13 p. (Non-Destructive Testing Conference 2010, NDT 2010).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Encapsulation of BSA within gelatin nanoparticles-laden biopolymer film

Zhang, J., Zhu, J., Akhter, K. F. & Thomas, A. A., 2010, Nanobiotechnology and Nanobiophotonics - Opportunities and Challenges. p. 42-46 5 p. (Materials Research Society Symposium Proceedings; vol. 1237).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Filters for Research output

Search results