Find Research outputs

2020

Transition Delay and Drag Reduction using Biomimetically Inspired Surface Waves

Bhatia, D., Li, G., Lin, Y., Sun, J., Barrington, P., Li, H. & Wang, J., 2020, In: Journal of Applied Fluid Mechanics. 13, 4, p. 1207-1222 16 p.

Research output: Journal Publication › Article › peer-review

Open Access

File

7 Citations (Scopus)

123 Downloads (Pure)

Vibration transmission and power flow in impact oscillators with linear and nonlinear constraints

Dai, W., Yang, J. & Shi, B., 15 Feb 2020, In: International Journal of Mechanical Sciences. 168, 105234.

Research output: Journal Publication › Article › peer-review

58 Citations (Scopus)

2019

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS₂ as a Replacement for PEDOT:PSS

Lin, Y., Adilbekova, B., Firdaus, Y., Yengel, E., Faber, H., Sajjad, M., Zheng, X., Yarali, E., Seitkhan, A., Bakr, O. M., El-Labban, A., Schwingenschlögl, U., Tung, V., McCulloch, I., Laquai, F. & Anthopoulos, T. D., 1 Nov 2019, In: Advanced Materials. 31, 46, 1902965.

Research output: Journal Publication › Article › peer-review

Open Access

542 Citations (Scopus)

Abrasive processes for micro parts and structures

Aurich, J. C., Kirsch, B., Setti, D., Axinte, D., Beaucamp, A., Butler-Smith, P. & Yamaguchi, H., 2019, In: CIRP Annals - Manufacturing Technology. 68, 2, p. 653-676 24 p.

Research output: Journal Publication › Article › peer-review

37 Citations (Scopus)

Active fault-tolerant control for vertical tail damaged aircraft with dissimilar redundant actuation system using integral sliding mode control

Ijaz, S., Hamayun, M. T., Yan, L. & Shi, C., 1 Apr 2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 7, p. 2361-2378 18 p.

Research output: Journal Publication › Article › peer-review

9 Citations (Scopus)

Aerodynamic design optimization of an axial flow compressor stator using parameterized free-form deformation

Adjei, R. A., Wang, W. Z. & Liu, Y. Z., Oct 2019, In: Journal of Engineering for Gas Turbines and Power. 141, 10, 101015.

Research output: Journal Publication › Article › peer-review

26 Citations (Scopus)

Air-cooling of a hollow high-speed permanent magnet rotor

Connor, P. H., La Rocca, A., Xu, Z., Degano, M., Eastwick, C. N., Pickering, S. J. & Gerada, C., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1216-1221 6 p. 8785089. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

An active modulation scheme for avoiding overcharging in the dual converter with isolated asymmetric supplies

Huang, Z., Yang, T., Giangrande, P., Wheeler, P. & Galea, M., Sept 2019, 2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe. Institute of Electrical and Electronics Engineers Inc., 8915181. (2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Analysis of a novel actively controlled split path automotive gear powertrain topology

Spitas, C., Amani, A., Spitas, V. & Akiltayev, A., 2019, In: International Journal of Powertrains. 8, 2, p. 157-174 18 p.

Research output: Journal Publication › Article › peer-review

3 Citations (Scopus)

Analysis of multi-degree of freedom magnetic suspension motor based on FEM

Yu, M., Yan, L., Zhang, L., Gerada, C. & Chang, S., Apr 2019, Proceedings of the 8th International Conference on Fluid Power and Mechatronics, FPM 2019. Institute of Electrical and Electronics Engineers Inc., p. 1373-1377 5 p. 9035829. (Proceedings of the 8th International Conference on Fluid Power and Mechatronics, FPM 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Analysis of the driving forces of urban expansion in Luxor City by Remote sensing monitoring

Mahmoud, H., Alfons, R. & Reffat, R., 2019, In: International Journal of Integrated Engineering. 11, 6, p. 296-307 12 p.

Research output: Journal Publication › Article › peer-review

Open Access

8 Citations (Scopus)

Analytical model of dynamic and overlapped footprints in abrasive air jet polishing of optical glass

Wang, Z., Nan Li, H., Yu, T. B., Wang, Z. X. & Zhao, J., Jun 2019, In: International Journal of Machine Tools and Manufacture. 141, p. 59-77 19 p.

Research output: Journal Publication › Article › peer-review

35 Citations (Scopus)

An Energy Management Method for a Microgrid Group Considering Uncertainty Models

Wang, P., Tan, L., Zhang, X., Wang, W. & Xu, D., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921837. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

An exploration of the combined effects of NIR and VIS spectrally selective thermochromic materials on building performance

Liang, R., Sun, Y., Aburas, M., Wilson, R. & Wu, Y., 15 Oct 2019, In: Energy and Buildings. 201, p. 149-162 14 p.

Research output: Journal Publication › Article › peer-review

Open Access

29 Citations (Scopus)

An interaction-aware predictive motion planner for unmanned ground vehicles in dynamic street scenarios

Li, J., Dai, B., Li, X., Wang, R., Xu, X., Jiang, B. & Di, Y., 11 Apr 2019, In: International Journal of Robotics and Automation. 34, 3, p. 203-215 13 p.

Research output: Journal Publication › Article › peer-review

Open Access

8 Citations (Scopus)

A novel design of flow structure model for online viscosity measurement

Bie, Y., Guo, X., Song, P., Yang, J. & Li, Z., Jan 2019, In: Insight: Non-Destructive Testing and Condition Monitoring. 61, 1, p. 9-14 6 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

A novel method to produce kiss-bonds in composites components for NDI and characterisation purposes

Telford, R., O'Carroll, A., Pierce, R. S. & Young, T. M., 15 Sept 2019, In: Composites Part B: Engineering. 173, 106926.

Research output: Journal Publication › Article › peer-review

Open Access

File

8 Citations (Scopus)

49 Downloads (Pure)

A Novel Modelling Approach of Modular Multi Three-phase Drive System for High Performance Applications

Wang, X., Gu, C., Buticchi, G., Zhang, H. & Gerada, C., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922523. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

2 Citations (Scopus)

A numerical and experimental analysis of an integrated TEG-PCM power enhancement system for photovoltaic cells

Darkwa, J., Calautit, J., Du, D. & Kokogianakis, G., 15 Aug 2019, In: Applied Energy. 248, p. 688-701 14 p.

Research output: Journal Publication › Article › peer-review

Open Access

119 Citations (Scopus)

A quick method for evaluating the thresholds of workpiece surface damage in machining

Xu, D., Liao, Z., Axinte, D., Hardy, M. & M'Saoubi, R., 2019, In: CIRP Annals - Manufacturing Technology. 68, 1, p. 61-64 4 p.

Research output: Journal Publication › Article › peer-review

Open Access

18 Citations (Scopus)

A solution method based on Lagrange multipliers and Legendre polynomial series for free vibration analysis of laminated plates sandwiched by two MFC layers

Baghaee, M., Farrokhabadi, A. & Jafari-Talookolaei, R. A., 12 May 2019, In: Journal of Sound and Vibration. 447, p. 42-60 19 p.

Research output: Journal Publication › Article › peer-review

22 Citations (Scopus)

A stochastic differential equation SIS epidemic model with two correlated Brownian motions

Cai, S., Cai, Y. & Mao, X., 1 Sept 2019, In: Nonlinear Dynamics. 97, 4, p. 2175-2187 13 p.

Research output: Journal Publication › Article › peer-review

Open Access

18 Citations (Scopus)

Asymmetrical flux density distribution in stator teeth of surface permanent magnet machines

Sala, G., De Gaetano, D., Degano, M. & Gerada, C., Apr 2019, Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019. Institute of Electrical and Electronics Engineers Inc., p. 29-33 5 p. 8887831. (Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

2 Citations (Scopus)

Automatic measurement of grinding-induced white layer in titanium alloys based on image processing technique

Zhao, Y. J., Liang, D. T., Song, K. C., Yan, Y. H. & Li, H. N., 1 Nov 2019, In: International Journal of Advanced Manufacturing Technology. 105, 1-4, p. 1483-1496 14 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Automotive powertrain reliability modelling using an idea algebra

Amrin, A., Spitas, C., Vasileiou, G. & Spitas, V., 2019, In: International Journal of Powertrains. 8, 3, p. 191-223 33 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

Bio-sensing and reinforcement learning approaches for occupant-centric control

Zhang, C., Zhang, Z. & Loftness, V., 2019, ASHRAE Transactions - 2019 ASHRAE Annual Conference. ASHRAE, p. 364-371 8 p. (ASHRAE Transactions; vol. 125).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Braking torque compensation strategy and thermal behavior of a dual three-phase winding PMSM during short-circuit fault

Giangrande, P., Madonna, V., Nuzzo, S., Gerada, C. & Galea, M., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2245-2250 6 p. 8785164. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

19 Citations (Scopus)

Characterization of compressive behavior of PVC foam infilled composite sandwich panels with different corrugated core shapes

Taghizadeh, S. A., Farrokhabadi, A., Liaghat, G., Pedram, E., Malekinejad, H., Mohammadi, S. F. & Ahmadi, H., Feb 2019, In: Thin-Walled Structures. 135, p. 160-172 13 p.

Research output: Journal Publication › Article › peer-review

90 Citations (Scopus)

Comparative Analysis of AC losses with round magnet wire and Litz wire winding of a High - Speed PM Machine

Bardalai, A., Zhang, X., Zou, T., Gerada, D., Li, J. & Gerada, C., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922173. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

26 Citations (Scopus)

Computerised symbolic planetary transmission modelling for automotive design

Spitas, C., Amrin, A., Amani, A., Vasileiou, G. & Spitas, V., 2019, In: International Journal of Powertrains. 8, 1, p. 58-73 16 p.

Research output: Journal Publication › Article › peer-review

Open Access

1 Citation (Scopus)

Correlation of Evaporation Heat Transfer Inside 8.8 mm and 7.14 mm Horizontal Round Micro-Fin Tubes

Chen, X., Li, W., Sun, Z., Ren, Y., Liu, F. & Xu, J. L., 25 Feb 2019, In: Heat Transfer Engineering. 40, 3-4, p. 320-329 10 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Designing an advanced electrical motor for propulsion of electric aircraft

Golovanov, D., Gerada, D., Xu, Z., Gerada, C., Page, A. & Sawata, T., 2019, AIAA Propulsion and Energy Forum and Exposition, 2019. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Propulsion and Energy Forum and Exposition, 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

18 Citations (Scopus)

Development of an integrated micro macro model for anticipating matrix cracking evolution and fiber breakage in the laminated composite containing an open hole

Farrokhabadi, A. & Babaei, R., 15 Apr 2019, In: Engineering Fracture Mechanics. 211, p. 161-179 19 p.

Research output: Journal Publication › Article › peer-review

9 Citations (Scopus)

Development of fire retardancy of natural fiber composite encouraged by a synergy between zinc borate and ammonium polyphosphate

Khalili, P., Liu, X., Tshai, K. Y., Rudd, C., Yi, X. & Kong, I., 15 Feb 2019, In: Composites Part B: Engineering. 159, p. 165-172 8 p.

Research output: Journal Publication › Article › peer-review

99 Citations (Scopus)

Dual-rotor permanent magnet motor for electric superbike

Golovanov, D., Galassini, A., Flanagan, L., Gerada, D., Xu, Z. & Gerada, C., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 951-956 6 p. 8785287. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

12 Citations (Scopus)

Eddy current loss control in high speed PM starter-generator

Zhang, X., Zhang, H., Gerada, C., Gerada, D., Li, J., Xu, Z. & Liu, C., Apr 2019, Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019. Institute of Electrical and Electronics Engineers Inc., p. 46-50 5 p. 8887771. (Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

Effect of fiber suspension jet stability on alignment quality of discontinuous carbon fiber tapes

Liu, Z., Turner, T. A., Wong, K. H. & Pickering, S. J., Nov 2019, In: International Journal of Multiphase Flow. 120, 103102.

Research output: Journal Publication › Article › peer-review

Open Access

3 Citations (Scopus)

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

Wu, C. Q., Gao, G. L., Li, H. N. & Luo, H., 1 Oct 2019, In: International Journal of Advanced Manufacturing Technology. 104, 5-8, p. 2301-2315 15 p.

Research output: Journal Publication › Article › peer-review

33 Citations (Scopus)

Exergetic, economic and carbon emission studies of bio-olefin production via indirect steam gasification process

Jiang, P., Parvez, A. M., Meng, Y., Xu, M. X., Shui, T. C., Sun, C. G. & Wu, T., 15 Nov 2019, In: Energy. 187, 115933.

Research output: Journal Publication › Article › peer-review

Open Access

File

26 Citations (Scopus)

76 Downloads (Pure)

Experimentally validated multi-scale modeling of 3D printed hyper-elastic lattices

Damanpack, A. R., Bodaghi, M. & Liao, W. H., Jan 2019, In: International Journal of Non-Linear Mechanics. 108, p. 87-110 24 p.

Research output: Journal Publication › Article › peer-review

22 Citations (Scopus)

Fabrication and microstrain evolution of al-tib₂ composite coating by cold spray deposition

Chen, H., Pala, Z., Hussain, T. & McCartney, D. G., Jun 2019, In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 233, 6, p. 1044-1052 9 p.

Research output: Journal Publication › Article › peer-review

Open Access

File

13 Citations (Scopus)

70 Downloads (Pure)

Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining

Hawi, S., Dickins, A., Pardal, G. R., Giusca, C., Pearce, O. & Goel, S., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 108-111 4 p. (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Fast and Accurate Model for Optimization-based Design of Fractional-Slot Surface PM Machines

Cheong, B., Giangrande, P., Zhang, X., Galea, M., Zanchetta, P. & Wheeler, P., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921605. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

8 Citations (Scopus)

Fatigue performance analysis of GRE composite pipes by conducting tension-tension tests on the rings cut from the pipe

Mahdavi, H., Rahimi, G. H. & Farrokhabadi, A., 13 Aug 2019, In: Journal of Testing and Evaluation. 49, 4

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Fault tolerance in multiple-active bridge converters applied in smart transformers

Ferreira, V., Buticchi, G., Cardoso, B. & Liserre, M., Sept 2019, 2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe. Institute of Electrical and Electronics Engineers Inc., 8915477. (2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Fault-Tolerant Electrical Machines for Transport Applications

Ismagilov, F., Gerada, C., Degano, M., Gurevich, O., Guliyenko, A., Vavilov, V. & Gusakov, D., Oct 2019, Proceedings - ICOECS 2019: 2019 International Conference on Electrotechnical Complexes and Systems. Institute of Electrical and Electronics Engineers Inc., 8949914. (Proceedings - ICOECS 2019: 2019 International Conference on Electrotechnical Complexes and Systems).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Fracture behavior and self-sharpening mechanisms of polycrystalline cubic boron nitride in grinding based on cohesive element method

HUANG, X., LI, H., RAO, Z. & DING, W., Dec 2019, In: Chinese Journal of Aeronautics. 32, 12, p. 2727-2742 16 p.

Research output: Journal Publication › Article › peer-review

Open Access

File

23 Citations (Scopus)

64 Downloads (Pure)

Free-Form Design of Electrical Machine Rotor Cores for Production Using Additive Manufacturing

Garibaldi, M., Gerada, C., Ashcroft, I. & Hague, R., 1 Jul 2019, In: Journal of Mechanical Design, Transactions Of the ASME. 141, 7, 071401.

Research output: Journal Publication › Article › peer-review

49 Citations (Scopus)

Gear fault diagnosis using the general linear chirplet transform with vibration and acoustic measurements

Hartono, D., Halim, D. & Roberts, G. W., 1 Mar 2019, In: Journal of Low Frequency Noise Vibration and Active Control. 38, 1, p. 36-52 17 p.

Research output: Journal Publication › Article › peer-review

Open Access

21 Citations (Scopus)

Geometrical modelling of pulsed laser ablation of high performance metallic alloys

Cha, D., Axinte, D. & Billingham, J., Jun 2019, In: International Journal of Machine Tools and Manufacture. 141, p. 78-88 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

36 Citations (Scopus)

Filters for Research output

Search results