Find Research outputs

2019

High-quality machining of edges of thin-walled plates by tilt side milling based on an analytical force-based model

Liu, G., Dang, J., Ming, W., An, Q., Chen, M. & Li, H., 1 Jun 2019, In: Journal of Manufacturing Science and Engineering. 141, 6, 061008-1.

Research output: Journal Publication › Article › peer-review

9 Citations (Scopus)

Hybrid magnet - Field winding solutions for exciters of synchronous generators

Decuzzi, G., Nuzzo, S., Bolognesi, P., Giangrande, P. & Galea, M., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1458-1463 6 p. 8785174. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification

Fazeli, M., Florez, J. P. & Simão, R. A., 15 Apr 2019, In: Composites Part B: Engineering. 163, p. 207-216 10 p.

Research output: Journal Publication › Article › peer-review

184 Citations (Scopus)

Improvement of fuel sources and energy products flexibility in coal power plants via energy-cyber-physical-systems approach

Zhao, H., Jiang, P., Chen, Z., Ezeh, C. I., Hong, Y., Guo, Y., Zheng, C., Džapo, H., Gao, X. & Wu, T., 15 Nov 2019, In: Applied Energy. 254, 113554.

Research output: Journal Publication › Article › peer-review

28 Citations (Scopus)

Increased power output of an electromagnetic vibration energy harvester through anti-phase resonance

Foong, F. M., Thein, C. K., Ooi, B. L. & Yurchenko, D., 1 Feb 2019, In: Mechanical Systems and Signal Processing. 116, p. 129-145 17 p.

Research output: Journal Publication › Article › peer-review

50 Citations (Scopus)

Information technologies for distributed machine drives: An overview

Savi, F., Buticchi, G., Gerada, C., Wheeler, P. & Barater, D., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1805-1809 5 p. 8785232. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

9 Citations (Scopus)

Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines

Madonna, V., Giangrande, P., Zhao, W., Wang, Y., Zhang, H. & Galea, M., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921657. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

16 Citations (Scopus)

Integration of machine learning approaches for accelerated discovery of transition-metal dichalcogenides as Hg⁰ sensing materials

Zhao, H., Ezeh, C. I., Ren, W., Li, W., Pang, C. H., Zheng, C., Gao, X. & Wu, T., 15 Nov 2019, In: Applied Energy. 254, 113651.

Research output: Journal Publication › Article › peer-review

27 Citations (Scopus)

Introducing physics of failure considerations in the electrical machines design

Madonna, V., Giangrande, P. & Galea, M., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2233-2238 6 p. 8785304. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

28 Citations (Scopus)

Investigation on the interactions among lignocellulosic constituents and minerals of biomass and their influences on co-firing

Shi, K., Oladejo, J. M., Yan, J. & Wu, T., 15 Jul 2019, In: Energy. 179, p. 129-137 9 p.

Research output: Journal Publication › Article › peer-review

Open Access

File

26 Citations (Scopus)

78 Downloads (Pure)

Machining of biocompatible materials — Recent advances

Axinte, D., Guo, Y., Liao, Z., Shih, A. J., M'Saoubi, R. & Sugita, N., 2019, In: CIRP Annals - Manufacturing Technology. 68, 2, p. 629-652 24 p.

Research output: Journal Publication › Article › peer-review

Open Access

56 Citations (Scopus)

Manufacturing of Ultra-Fine Particle Coal Fly Ash–A380 Aluminum Matrix Composites with Improved Mechanical Properties by Improved Ring Milling and Oscillating Microgrid Mixing

Kaisarlis, G., Vasiliou, G., Spitas, V., Inglezakis, V., Itskos, G. & Spitas, C., 15 May 2019, In: Journal of Materials Engineering and Performance. 28, 5, p. 2630-2640 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

5 Citations (Scopus)

Modelling and Analysis of an Aircraft On-board Electric Taxiing System

Lukic, M., Giangrande, P., Klumpner, C. & Galea, M., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921709. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

2 Citations (Scopus)

Modelling the size and strength benefits of optimised step/scarf joints and repairs in composite structures

Pierce, R. S. & Falzon, B. G., 15 Sept 2019, In: Composites Part B: Engineering. 173, 107020.

Research output: Journal Publication › Article › peer-review

Open Access

File

25 Citations (Scopus)

59 Downloads (Pure)

Neuroadaptive quantized PID sliding-mode control for heterogeneous vehicular platoon with unknown actuator deadzone

Guo, X., Wang, J., Liao, F. & Teo, R. S. H., 10 Jan 2019, In: International Journal of Robust and Nonlinear Control. 29, 1, p. 188-208 21 p.

Research output: Journal Publication › Article › peer-review

Open Access

59 Citations (Scopus)

Non-linear modeling of gear drive dynamics incorporating intermittent tooth contact analysis and tooth eigenvibrations

Sakaridis, E., Spitas, V. & Spitas, C., Jun 2019, In: Mechanism and Machine Theory. 136, p. 307-333 27 p.

Research output: Journal Publication › Article › peer-review

48 Citations (Scopus)

Nonlinear stability analysis of piecewise actuated piezoelectric microstructures

SoltanRezaee, M., Bodaghi, M., Farrokhabadi, A. & Hedayati, R., Sept 2019, In: International Journal of Mechanical Sciences. 160, p. 200-208 9 p.

Research output: Journal Publication › Article › peer-review

Open Access

27 Citations (Scopus)

Numerical study of the impact of different cooling arrangements on a high length/diameter ratio motor for electric commercial vehicle

La Rocca, S., McQueen, A., Paciura, K., La Rocca, A., Walker, A., Vakil, G., Gerada, D., Al-Ani, M., Zou, T., Ramanathan, R. & Gerada, C., Oct 2019, Proceedings - ICOECS 2019: 2019 International Conference on Electrotechnical Complexes and Systems. Institute of Electrical and Electronics Engineers Inc., 8949929. (Proceedings - ICOECS 2019: 2019 International Conference on Electrotechnical Complexes and Systems).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

5 Citations (Scopus)

Numerical study on the impact of end windings porosity on the fluid flow and heat transfer in a totally enclosed fan-cooled electrical machine

Rocca, S. L., Pickering, S. J., Eastwick, C. N., Gerada, C. & Ronnberg, K., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2138-2143 6 p. 8785400. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

On mechanical damping of cantilever beam-based electromagnetic resonators

Foong, F. M., Thein, C. K. & Yurchenko, D., 15 Mar 2019, In: Mechanical Systems and Signal Processing. 119, p. 120-137 18 p.

Research output: Journal Publication › Article › peer-review

37 Citations (Scopus)

On modelling of laser assisted machining: Forward and inverse problems for heat placement control

Shang, Z., Liao, Z., Sarasua, J. A., Billingham, J. & Axinte, D., Mar 2019, In: International Journal of Machine Tools and Manufacture. 138, p. 36-50 15 p.

Research output: Journal Publication › Article › peer-review

Open Access

78 Citations (Scopus)

On the design of partial discharge-free low voltage electrical machines

Madonna, V., Giangrande, P., Zhao, W., Zhang, H., Gerada, C. & Galea, M., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1837-1842 6 p. 8785413. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

43 Citations (Scopus)

On the predictive modelling of machined surface topography in abrasive air jet polishing of quartz glass

Wang, Z., Li, H. N., Yu, T. B., Chen, H. & Zhao, J., Mar 2019, In: International Journal of Mechanical Sciences. 152, p. 1-18 18 p.

Research output: Journal Publication › Article › peer-review

55 Citations (Scopus)

On understanding the microstructure of SiC/SiC Ceramic Matrix Composites (CMCs) after a material removal process

Gavalda Diaz, O., Axinte, D. A., Butler-Smith, P. & Novovic, D., 16 Jan 2019, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 743, p. 1-11 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

84 Citations (Scopus)

On vibration transmission in oscillating systems incorporating bilinear stiffness and damping elements

Shi, B., Yang, J. & Rudd, C., Jan 2019, In: International Journal of Mechanical Sciences. 150, p. 458-470 13 p.

Research output: Journal Publication › Article › peer-review

51 Citations (Scopus)

Optimal advance angle for torque maximisation in high-speed, single-pulse operated, switched reluctance machines

Rocca, R., Capponi, F. G., Papadopoulos, S., De Donato, G., Rashed, M. & Galea, M., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 80-85 6 p. 8785350. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Optimal design of a medium-voltage grid analyzer

Hahn, F., Buticchi, G., Teodorescu, R., Fuchs, F. W. & Liserre, M., Sept 2019, 2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe. Institute of Electrical and Electronics Engineers Inc., 8915198. (2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Optimized Carrier Disposition Based Discontinuous Pulse-width Modulation Method for three-level NPC Converters

Wang, M., Xu, L., Yang, B., Li, J., Gu, C., Zhang, H., Gerada, C. & Li, Y., Sept 2019, 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019. Institute of Electrical and Electronics Engineers Inc., p. 1442-1446 5 p. 8912600. (2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

Optimized sizing of IPM machines for automotive traction application

Valente, G., Gerada, D., Degano, M., Gerada, C., Foulsham, J. & Beeby, D., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 970-975 6 p. 8785245. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

5 Citations (Scopus)

Performing creativity: Design-thinking amongst Chinese industry employees

Liu, B. & Sterling, S. E., 1 Jan 2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 2, p. 432-439 8 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

Prediction of occupancy level and energy consumption in office building using blind system identification and neural networks

Wei, Y., Xia, L., Pan, S., Wu, J., Zhang, X., Han, M., Zhang, W., Xie, J. & Li, Q., 15 Apr 2019, In: Applied Energy. 240, p. 276-294 19 p.

Research output: Journal Publication › Article › peer-review

123 Citations (Scopus)

Profiled rotary dresser with controlled size and distribution of abrasive grits: Performance assessment

Spampinato, A., Axinte, D. & Butler-Smith, P., 2019, In: CIRP Annals - Manufacturing Technology. 68, 1, p. 349-352 4 p.

Research output: Journal Publication › Article › peer-review

7 Citations (Scopus)

PVDF membranes containing reduced graphene oxide: Effect of degree of reduction on membrane distillation performance

Abdel-Karim, A., Luque-Alled, J. M., Leaper, S., Alberto, M., Fan, X., Vijayaraghavan, A., Gad-Allah, T. A., El-Kalliny, A. S., Szekely, G., Ahmed, S. I. A., Holmes, S. M. & Gorgojo, P., 15 Feb 2019, In: Desalination. 452, p. 196-207 12 p.

Research output: Journal Publication › Article › peer-review

Open Access

112 Citations (Scopus)

Recent progress on non-fullerene acceptors for organic photovoltaics

Sun, H., Chen, F. & Chen, Z. K., Apr 2019, In: Materials Today. 24, p. 94-118 25 p.

Research output: Journal Publication › Review article › peer-review

123 Citations (Scopus)

Reduced order lumped parameter thermal network for dual three-phase permanent magnet machines

Giangrande, P., Madonna, V., Nuzzo, S., Spagnolo, C., Gerada, C. & Galea, M., Apr 2019, Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019. Institute of Electrical and Electronics Engineers Inc., p. 71-76 6 p. 8887772. (Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

18 Citations (Scopus)

Refreshing the scope of the International Journal of Machine Tools and Manufacture (IJMTM)

Axinte, D., Oct 2019, In: International Journal of Machine Tools and Manufacture. 145, 103435.

Research output: Journal Publication › Editorial

Reliability analysis of metal-composite adhesive joints under debonding modes I, II, and I/II using the results of experimental and FEM analyses

Delbariani-Nejad, A., Malakouti, M. & Farrokhabadi, A., 1 Dec 2019, In: Fatigue and Fracture of Engineering Materials and Structures. 42, 12, p. 2644-2662 19 p.

Research output: Journal Publication › Article › peer-review

24 Citations (Scopus)

Reliability vs. performances of electrical machines: Partial discharges issue

Madonna, V., Giangrande, P., Zhao, W., Buticchi, G., Zhang, H., Gerada, C. & Galea, M., Apr 2019, Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019. Institute of Electrical and Electronics Engineers Inc., p. 77-82 6 p. 8887809. (Proceedings - 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis, WEMDCD 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

27 Citations (Scopus)

Rotor configuration comparison for the design of a PM conical machine

Roggia, S., Roggia, G., Francesco, C. & Galea, M., Sept 2019, 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019. Institute of Electrical and Electronics Engineers Inc., p. 3976-3982 7 p. 8912492. (2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Rotordynamic Analysis of a Permanent Magnet Synchronous Motor Considering Nonlinear Unbalanced Magnetic Pull

Dai, W., Zhang, H., Halim, D., Yang, J., Xu, Z. & Li, J., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8921924. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

Rotor UMP & mechanical response in HSPMSM in typical running conditions

He, Y. L., Vakil, G., Zhang, X. C., Gao, P., Gerada, D. & Gerada, C., Sept 2019, 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019. Institute of Electrical and Electronics Engineers Inc., p. 3878-3883 6 p. 8913180. (2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Simplified analytical machine sizing for surface mounted permanent magnet machines

Xie, P., Ramanathan, R., Vakil, G. & Gerada, C., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 751-757 7 p. 8785167. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

8 Citations (Scopus)

Simplified Lumped Parameter Thermal Network for Short-Duty Dual Three-Phase Permanent Magnet Machines

Giangrande, P., Madonna, V., Zhao, W., Wang, Y., Gerada, C. & Galea, M., Aug 2019, 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019. Institute of Electrical and Electronics Engineers Inc., 8922309. (2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

5 Citations (Scopus)

Single-phase open-circuit fault operation of bearingless multi-sector pm machines

Wen, Z., Valente, G., Formentini, A., Papini, L., Zanchetta, P. & Gerada, C., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1087-1092 6 p. 8785111. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Sizing, design, and modelling of aerospace electric drive system with long feeder cables

Xie, P., Vakil, G. & Gerada, C., May 2019, 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019. Institute of Electrical and Electronics Engineers Inc., p. 993-1000 8 p. 8785399. (2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

3 Citations (Scopus)

Smart current limitation technique for a multiphase bearingless machine with combined winding system

Wen, Z., Valente, G., Formentini, A., Papini, L., Zanchetta, P. & Gerada, C., Sept 2019, 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019. Institute of Electrical and Electronics Engineers Inc., p. 6099-6105 7 p. 8913291. (2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

Spring amplification and dynamic friction modelling of a 2DOF/2SDOF system in an electromagnetic vibration energy harvester – Experiment, simulation, and analytical analysis

Thein, C. K., Foong, F. M. & Shu, Y. C., 1 Oct 2019, In: Mechanical Systems and Signal Processing. 132, p. 232-252 21 p.

Research output: Journal Publication › Article › peer-review

20 Citations (Scopus)

State-of-the-art of surface integrity in machining of metal matrix composites

Liao, Z., Abdelhafeez, A., Li, H., Yang, Y., Diaz, O. G. & Axinte, D., Aug 2019, In: International Journal of Machine Tools and Manufacture. 143, p. 63-91 29 p.

Research output: Journal Publication › Review article › peer-review

Open Access

205 Citations (Scopus)

Stress analysis of self-aligning automotive gearing

Beisekenov, I., Spitas, C., Amani, A., Tsolakis, E. & Spitas, V., 2019, In: International Journal of Powertrains. 8, 2, p. 93-114 22 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Stress and damping of wide cantilever beams under free vibration

Foong, F. M., Ket, T. C., Lee, O. B. & Aziz, A. R. A., 1 Jan 2019, In: Journal of Mechanical Science and Technology. 33, 1, p. 21-27 7 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Filters for Research output

Search results