Find Research outputs

2007

Economic growth and process spillovers with step-by-step innovation

Luckraz, S., 2007, Annals of the International Society of Dynamic Games. Birkhauser, p. 507-526 20 p. (Annals of the International Society of Dynamic Games; vol. 9).

Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review

Optimization on the design of an ultra-high-power multisection tunable laser gain epilayers

Zhang, Y., Benson, T. M. & Christopoulos, C., 2007, Physics and Simulation of Optoelectronic Devices XV. 64680F. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6468).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

System dynamic model for the prediction of urban energy consumption trends

Fong, W. K., Matsumoto, H., Lun, Y. F. & Kimura, R., 2007, IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment. p. 757-764 8 p. (IAQVEC 2007 Proceedings - 6th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings: Sustainable Built Environment; vol. 1).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

17 Citations (Scopus)

Testing the Global and Regional Strategies of Multinational Enterprises

Li, L. & Li, D., 2007, Regional Aspects of Multinationality and Performance. Rugman, A. (ed.). p. 263-296 34 p. (Research in Global Strategic Management; vol. 13).

Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review

10 Citations (Scopus)

Using games engines for archaeological visualisation: Recreating lost worlds

Ch'ng, E., 2007, Proceedings of CGAMES 2007 - 11th International Conference on Computer Games: AI, Animation, Mobile, Educational and Serious Games. University of Wolverhampton, p. 26-30 5 p. (Proceedings of CGAMES 2007 - 11th International Conference on Computer Games: AI, Animation, Mobile, Educational and Serious Games).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

13 Citations (Scopus)

2006

Alignment of recycled carbon fibre and its application as a reinforcement

Jiang, G., Wong, K. H., Pickering, S. J., Walker, G. S. & Rudd, C. D., 2006, 38th SAMPE Fall Technical Conference: Global Advances in Materials and Process Engineering. (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

8 Citations (Scopus)

An integrated fuzzy approach for the selection of manufacturing technologies

Chan, F. T. S., Chan, H. K., Chan, M. H. & Humphreys, P. K., Jan 2006, In: International Journal of Advanced Manufacturing Technology. 27, 7-8, p. 747-758 12 p.

Research output: Journal Publication › Article › peer-review

35 Citations (Scopus)

A physical compact model for electron transport across single molecules

Fransson, J., Bengone, O. M., Larsson, J. A. & Greer, J. C., Nov 2006, In: IEEE Transactions on Nanotechnology. 5, 6, p. 745-749 5 p.

Research output: Journal Publication › Article › peer-review

2 Citations (Scopus)

A systematic approach to manufacturing packaging logistics

Chan, F. T. S., Chan, H. K. & Choy, K. L., Jul 2006, In: International Journal of Advanced Manufacturing Technology. 29, 9-10, p. 1088-1101 14 p.

Research output: Journal Publication › Article › peer-review

51 Citations (Scopus)

Capacity of multi-lane roundabout: Methodology based on lane utilization

Bie, J., Lo, H. K. & Wong, S. C., 2006, Applications of Advanced Technology in Transportation - Proceedings of the Ninth International Conference on Applications of Advanced Technology in Transportation. p. 590-595 6 p. (Applications of Advanced Technology in Transportation - Proceedings of the Ninth International Conference on Applications of Advanced Technology in Transportation).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

China's 15-year science and technology plan

Cao, C., Suttmeier, R. P. & Simon, D. F., Dec 2006, Physics Today, 59, 12, p. 38-43 6 p.

Research output: Contribution to specialist publication › Article

Open Access

131 Citations (Scopus)

Examination of swirling flow using electrical resistance tomography

Stevenson, R., Harrison, S. T. L., Miles, N. & Cilliers, J. J., 1 Mar 2006, In: Powder Technology. 162, 2, p. 157-165 9 p.

Research output: Journal Publication › Article › peer-review

29 Citations (Scopus)

Photonic integrated circuits based on novel glass waveguides and devices

Zhang, Y., Zhang, D., Pan, W., Rowe, H., Benson, T., Loni, A., Sewell, P., Furniss, D. & Seddon, A. B., 2006, Integrated Optics, Silicon Photonics, and Photonic Integrated Circuits. 61830A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Removal of pollutants with activated carbon produced from K ₂CO₃ activation of lignin from reed black liquors

Sun, Y., Zhang, J. P., Yang, G. & Li, Z. H., 2006, In: Chemical and Biochemical Engineering Quarterly. 20, 4, p. 429-435 7 p.

Research output: Journal Publication › Article › peer-review

39 Citations (Scopus)

Reverse logistics model for mobile phone industry

Chan, F. T. S., Chan, H. K. & Zhang, J., 2006, 2006 IEEE International Conference on Service Operations and Logistics, and Informatics, SOLI 2006. p. 294-299 6 p. 1700881. (2006 IEEE International Conference on Service Operations and Logistics, and Informatics, SOLI 2006).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

Ultrafine powder coatings, an innovation for the coating industry

Zhang, H. & Zhu, J., 2006.

Research output: Contribution to conference › Paper › peer-review

2005

Co-consolidating thermoplastic composite article after thermoforming stiffers

Wang, K. J., Yi, X. S., Tang, B. M. & Li, H. Y., Jun 2005, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 25, 3, p. 16-20 5 p.

Research output: Journal Publication › Article › peer-review

Managing global research and development in China: Patterns of R&D configuration and evolution

Li, J. T. & Yue, D. R., Sept 2005, In: Technology Analysis and Strategic Management. 17, 3, p. 317-338 22 p.

Research output: Journal Publication › Article › peer-review

42 Citations (Scopus)

Methods employed for control of fouling in MF and UF membranes: A comprehensive review

Hilal, N., Ogunbiyi, O. O., Miles, N. J. & Nigmatullin, R., 2005, In: Separation Science and Technology. 40, 10, p. 1957-2005 49 p.

Research output: Journal Publication › Article › peer-review

406 Citations (Scopus)

Screen design with dynamic symmetry: A discovery

Ngo, D. C. L. & Ch'ng, E., Mar 2005, In: Computers in Human Behavior. 21, 2, p. 307-322 16 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

The perceived impact of successful outsourcing on customer service management

Khong, K. W., 2005, In: Supply Chain Management. 10, 5, p. 402-411 10 p.

Research output: Journal Publication › Article › peer-review

38 Citations (Scopus)

2004

A comprehensive survey and future trend of simulation study on FMS scheduling

Chan, F. T. S. & Chan, H. K., Feb 2004, In: Journal of Intelligent Manufacturing. 15, 1, p. 87-102 16 p.

Research output: Journal Publication › Review article › peer-review

116 Citations (Scopus)

Analysis of dynamic control strategies of an FMS under different scenarios

Chan, F. T. S. & Chan, H. K., Oct 2004, In: Robotics and Computer-Integrated Manufacturing. 20, 5, p. 423-437 15 p.

Research output: Journal Publication › Article › peer-review

38 Citations (Scopus)

Assessment of the effectiveness of a spindle power signal for tool condition monitoring in machining processes

Axinte, D. & Gindy, N., 1 Jul 2004, In: International Journal of Production Research. 42, 13, p. 2679-2691 13 p.

Research output: Journal Publication › Article › peer-review

66 Citations (Scopus)

Development of the supplier selection model - A case study in the advanced technology industry

Chan, F. T. S. & Chan, H. K., Dec 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 12, p. 1807-1824 18 p.

Research output: Journal Publication › Article › peer-review

137 Citations (Scopus)

QoS-based packet scheduling in wireless multimedia networks

Weng, Y. & Hou, C., 2004, 2004 IEEE Wireless Communications and Networking Conference, WCNC 2004. Institute of Electrical and Electronics Engineers Inc., Vol. 3. p. 1945-1950 6 p.

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Radical changes in Islamic glass technology: Evidence for conservatism and experimentation with new glass recipes from early and middle Islamic Raqqa, Syria

Henderson, J., McLoughlin, S. D. & McPhail, D. S., Aug 2004, In: Archaeometry. 46, 3, p. 439-468 30 p.

Research output: Journal Publication › Article › peer-review

163 Citations (Scopus)

Simultaneous carbon and nitrogen removal in anoxic-aerobic circulating fluidized bed biological reactor (CFBBR)

Cui, Y., Nakhla, G., Zhu, J. & Patel, A., 2004, In: Environmental Technology (United Kingdom). 25, 6, p. 699-712 14 p.

Research output: Journal Publication › Article › peer-review

54 Citations (Scopus)

Simultaneous site-wide energy, waste and production optimization - industrial case studies

Hirata, K., Sakamoto, H., Cheung, K. Y., O'Young, L. & Hui, C. W., 2004, In: Computer Aided Chemical Engineering. 18, C, p. 925-930 6 p.

Research output: Journal Publication › Article › peer-review

Socio-technical scenarios as a tool for transition policy: An example from the traffic and transport domain

Elzen, B., Geels, F. W., Hofman, P. S. & Green, K., 2004, System Innovation and the Transition to Sustainability. Edward Elgar Publishing, p. 251-281 31 p.

Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review

Open Access

72 Citations (Scopus)

Strategic purchasing, supply management, and firm performance

Chen, I. J., Paulraj, A. & Lado, A. A., Oct 2004, In: Journal of Operations Management. 22, 5, p. 505-523 19 p.

Research output: Journal Publication › Article › peer-review

636 Citations (Scopus)

Study on energy absorption behavior of composite tubes and integrated manufacturing of composite structure

Yi, X. S., Xu, Y. H., Tang, B. M., Chen, Y. G. & Zhang, Z. L., Sept 2004, In: Cailiao Gongcheng/Journal of Materials Engineering. 9, p. 3-8 6 p.

Research output: Journal Publication › Article › peer-review

9 Citations (Scopus)

The bivariable fractal interpolation algorithm of simulating the mountains in the distributed navigation simulation system

Liu, D., He, X. & Jin, Y., 2004, Proceedings of the Second International Conference on Information Technology and Applications (ICITA 2004). p. 410 1 p. (Proceedings of the Second International Conference on Information Technology and Applications (ICITA 2004)).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Thermoplastic composite access cover manufactured by co-consolidation after thermoforming stiffers

Wang, K. & Yi, X. S., Jun 2004, Composites Technologies For 2020. Woodhead Publishing Limited, p. 882-887 6 p.

Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review

Turning assisted with deep cold rolling - A cost efficient hybrid process for workpiece surface quality enhancement

Axinte, D. A. & Gindy, N., Jul 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 7, p. 807-811 5 p.

Research output: Journal Publication › Article › peer-review

17 Citations (Scopus)

Zhongguancun and China's high-tech parks in transition: "Growing pains" or "Premature senility"?

Cao, C., 2004, In: Asian Survey. 44, 5, p. 647-668 22 p.

Research output: Journal Publication › Article › peer-review

66 Citations (Scopus)

2003

A conceptual model of performance measurement for supply chains

Chan, F. T. S., Qi, H. J., Chan, H. K., Lau, H. C. W. & Ip, R. W. L., 1 Sept 2003, In: Management Decision. 41, 7, p. 635-642 8 p.

Research output: Journal Publication › Article › peer-review

Open Access

167 Citations (Scopus)

Analysis of dynamic dispatching rules for a flexible manufacturing system

Chan, F. T. S., Chan, H. K., Lau, H. C. W. & Ip, R. W. L., 20 Jul 2003, In: Journal of Materials Processing Technology. 138, 1-3, p. 325-331 7 p.

Research output: Journal Publication › Article › peer-review

60 Citations (Scopus)

An integrated fuzzy decision support system for multicriterion decision-making problems

Chan, F. T. S., Chan, H. K. & Chan, M. H., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 1, p. 11-28 18 p.

Research output: Journal Publication › Article › peer-review

34 Citations (Scopus)

Chinese peasant choices: Migration, rural industry or farming

Knight, J. & Song, L., Jun 2003, In: Oxford Development Studies. 31, 2, p. 123-148 26 p.

Research output: Journal Publication › Article › peer-review

64 Citations (Scopus)

Explaining the growth of international R & D alliances in China

Li, J. & Zhong, J., Mar 2003, In: Managerial and Decision Economics. 24, 2-3, p. 101-115 15 p.

Research output: Journal Publication › Article › peer-review

57 Citations (Scopus)

Real time fuzzy scheduling rules in FMS

Chan, F. T. S., Chan, H. K. & Kazerooni, A., Jun 2003, In: Journal of Intelligent Manufacturing. 14, 3-4, p. 341-350 10 p.

Research output: Journal Publication › Article › peer-review

39 Citations (Scopus)

Simulation analysis of a PCB factory using factorial design - A case study

Chan, F. T. S. & Chan, H. K., 2003, In: International Journal of Advanced Manufacturing Technology. 21, 7, p. 523-533 11 p.

Research output: Journal Publication › Article › peer-review

20 Citations (Scopus)

2002

A fuzzy multi-criteria decision-making technique for evaluation of scheduling rules

Chan, F. T. S., Chan, H. K. & Kazeroon, A., 2002, In: International Journal of Advanced Manufacturing Technology. 20, 2, p. 103-113 11 p.

Research output: Journal Publication › Article › peer-review

25 Citations (Scopus)

An intelligent fuzzy decision system for a flexible manufacturing system with multidecision points

Chan, F. T. S., Chan, H. K. & Kazerooni, A., 2002, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 216, 7, p. 1021-1031 11 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Evolving the ASP business model: Web service provision in the Grid era

Xu, H. & Seltsikas, P., 2002, Proceedings - 2nd International Conference on Peer-to-Peer Computing, P2P 2002. Shahmehri, N. & Graham, R. L. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 152-159 8 p. 1046325. (Proceedings - 2nd International Conference on Peer-to-Peer Computing, P2P 2002).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Strengthening China Through Science and Education: China's Development Strategy Toward the Twenty-First Century

Cao, C., Sept 2002, In: Issues and Studies. 38, 3, p. 122-149 28 p.

Research output: Journal Publication › Article › peer-review

12 Citations (Scopus)

Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models

Axinte, D. A. & Dewes, R. C., 3 Oct 2002, In: Journal of Materials Processing Technology. 127, 3, p. 325-335 11 p.

Research output: Journal Publication › Article › peer-review

186 Citations (Scopus)

The state of the art in simulation study on FMS scheduling: A comprehensive survey

Chan, F. T. S., Chan, H. K. & Lau, H. C. W., 2002, In: International Journal of Advanced Manufacturing Technology. 19, 11, p. 830-849 20 p.

Research output: Journal Publication › Article › peer-review

70 Citations (Scopus)

2001

A neural network based shape-from-shading measuring technique for engineering industries

Chow, T. W. S., Cho, S. Y. & Ho, J. K. L., Sept 2001, In: Measurement and Control. 34, 7, p. 212-215 4 p.

Research output: Journal Publication › Article › peer-review

Open Access

Filters for Research output

Search results