Xiaosu Yi

2014

Processing and properties of the C/SiBCN ceramic matrix composites prepared by PIP

Liu, W., Cao, L., Xu, C., Wang, L. & Yi, X., 2014, High Temperature Ceramic Matrix Composites 8 - A Collection of Papers Presented at the HTCMC 2013 Conference. American Ceramic Society, p. 335-343 9 p. (Ceramic Transactions; vol. 248).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Research of processing characteristics and mechanical properties of semi-prepreg RTM composites

Li, W. D., Liu, G., Bao, J. W., Hu, X. L. & Yi, X. S., Jun 2014, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 34, 3, p. 57-62 6 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Simultaneously increasing the electrical conductivity and fracture toughness of carbon-fiber composites by using silver nanowires-loaded interleaves

Guo, M., Yi, X., Liu, G. & Liu, L., 16 Jun 2014, In: Composites Science and Technology. 97, p. 27-33 7 p.

Research output: Journal Publication › Article › peer-review

76 Citations (Scopus)

The properties of the composites fabricated by a novel semi-prepreg RTM technique

Liu, G. G., Li, W. G., Bao, J. N. & Yi, X. U., 2014.

Research output: Contribution to conference › Paper › peer-review

2013

Analytical solutions for predicting in-plane strain and interlaminar shear stress of ultra-thin-walled lenticular collapsible composite tube in fold deformation

Bai, J. B., Xiong, J. J., Gao, J. P. & Yi, X. S., Mar 2013, In: Composite Structures. 97, p. 64-75 12 p.

Research output: Journal Publication › Article › peer-review

37 Citations (Scopus)

Carbon nanotube film interlayer toughened carbon fiber reinforced epoxy resin hybrid composites

Liu, G., Hu, X. I., Zhang, P., Yu, R. L., Bao, J. W., Chen, M. H., Li, Q. W. & Yi, X. S., 20 Oct 2013, In: Acta Polymerica Sinica. 10, p. 1334-1340 7 p.

Research output: Journal Publication › Article › peer-review

Open Access

17 Citations (Scopus)

Cure-induced strain development in an RTM epoxy resin as monitored by fiber bragg grating sensors

Li, X. Q., Zhang, Z. L. & Yi, X. S., 2013, Manufacturing Process and Equipment. p. 947-951 5 p. (Advanced Materials Research; vol. 694 697).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Effect of thermal residual stress on fiber Bragg grating sensors embedded in T-stiffened panels

Zhou, Y., Liu, G., Li, X. & Yi, X., Feb 2013, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 30, 1, p. 54-61 8 p.

Research output: Journal Publication › Article › peer-review

3 Citations (Scopus)

Effects of Z-direction flowing RTM technology on distribution of composites fiber volume fraction and thermoplastic toughener

Liu, G., Li, W., An, X. & Yi, X., 2013, Material Sciences and Manufacturing Technology. p. 110-114 5 p. (Advanced Materials Research; vol. 629).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

How to make high-performance structural composites multifunctional?

Yi, X. & Guo, M., 2013, p. 10-11. 2 p.

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

Hygrothermal properties of ramie fiber/phenolic resin composite under different hygrothermal conditions

Chen, X., Yin, P., Xian, G. J., Liu, Y. F., Liu, Q. M. & Yi, X. S., Apr 2013, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 33, 2, p. 58-65 8 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

Investigation of resin flowing and infiltration behavior during z direction flowing RTM process

Li, W., Liu, G., An, X. & Yi, X., Dec 2013, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 30, 6, p. 82-89 8 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Rheological properties of Al₂O₃ nanoparticle toughened epoxy resins

Zhang, D., Liu, G., Zhang, H., Bao, J., Zhang, Z., Yi, X. & Chen, X., 2013, In: Advanced Composites Letters. 22, 5, p. 100-105 6 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

The processing characteristics and mechanical properties of semi-prepreg RTM composites

Li, W., Liu, G., Hu, X., An, X., Zhong, X., Li, Y. & Yi, X., 2013, Recent Advancement on Material Science and Manufacturing Technologies. p. 153-158 6 p. (Advanced Materials Research; vol. 721).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

The production of tough, electrically conductive carbon fiber composite laminates for use in airframes

Guo, M. & Yi, X., Jul 2013, In: Carbon. 58, p. 241-244 4 p.

Research output: Journal Publication › Letter › peer-review

44 Citations (Scopus)

Tribological properties of carbon nanotube-reinforced composites

Qianming, G., Dan, L., Zhi, L., Xiaosu, Y. & Ji, L., May 2013, Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings: Second Edition. Elsevier Inc., p. 353-386 34 p.

Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review

3 Citations (Scopus)

2012

Curing shrinkage monitoring in epoxy resin by fiber Bragg grating sensors

Li, X. Q., Zhou, Y. J., Zhang, Z. L., Liu, G. & Yi, X. S., Aug 2012, In: Cailiao Gongcheng/Journal of Materials Engineering. 8, p. 73-77 5 p.

Research output: Journal Publication › Article › peer-review

10 Citations (Scopus)

Damage behavior of foam core sandwich composites subjected to quasi-static indentation testing

Yan, L., An, X., Cai, J. & Yi, X., 2012, Applied Mechanics and Mechatronics Automation. p. 57-64 8 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Dynamic impact analysis for "Ex-situ" toughened Composite laminates

Liu, L., An, X., Zhang, M. & Yi, X., 2012, Mechanical Engineering and Materials: ICMEM 2012. p. 579-584 6 p. (Applied Mechanics and Materials; vol. 152-154).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Effect of cure temperature on mechanical properties of composite reinforced by ramie fiber

Liu, Y. F., Bao, J. W., Li, Y. L. & Yi, X. S., Apr 2012, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 32, 2, p. 49-53 5 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

Effect of thermal residual stress on FBG sensors embedded in composite T-stiffened panels

Zhou, Y., Liu, G., Li, X. & Yi, X., 2012, Mechanical Engineering and Materials: ICMEM 2012. p. 1550-1554 5 p. (Applied Mechanics and Materials; vol. 152-154).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Electromagnetic interference shielding of single-wall carbon nanotube buckypaper/epoxy composites

Liu, G., Ma, W. J., An, X. F., Xie, S. S. & Yi, X. S., Apr 2012, In: Xinxing Tan Cailiao/New Carbon Materials. 27, 2, p. 100-104 5 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

Impact damage behavior of composite stiffened plates

Yan, L., An, X., Zhang, C. & Yi, X., 2012, Materials and Computational Mechanics. p. 954-957 4 p. (Applied Mechanics and Materials; vol. 117-119).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Improving compression after impact of T800H/5228A composite laminates through interlaminate toughening

Liu, L., An, X., Zhang, M. & Yi, X., 2012, Applied Mechanics and Mechatronics Automation. p. 41-46 6 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Improving the compression strength after impact of RTM composites by interlaminar thermoplastic nonwoven fabric

Zhang, P., Liu, G., Hu, X., Zhao, W. & Yi, X., 2012, Applied Mechanics and Mechatronics Automation. p. 12-16 5 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Manufacture and testing of composite T-joint fabricated via RTM process based on NCF technology

Liu, G., Luo, C., Zhang, D., Zhang, P., Zhang, L. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 99-104 6 p.

Research output: Journal Publication › Article › peer-review

3 Citations (Scopus)

Monitoring and characterization of chemical shrinkage during curing in a RTM resin

Li, X., Zhang, Z. & Yi, X. S., 2012, New Materials and Processes. p. 2594-2598 5 p. (Advanced Materials Research; vol. 476-478).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Natural modal and stability of integrated composite wing box fabricated by RTM process

Luo, C., Xiong, J., Yi, X., Zhang, Z. & Liu, G., Jun 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 3, p. 158-166 9 p.

Research output: Journal Publication › Article › peer-review

2 Citations (Scopus)

On depression of glass transition temperature of epoxy nanocomposites

Liu, G., Zhang, H., Zhang, D. J., Zhang, Z., An, X. F. & Yi, X. S., Oct 2012, In: Journal of Materials Science. 47, 19, p. 6891-6895 5 p.

Research output: Journal Publication › Article › peer-review

27 Citations (Scopus)

Preform-based toughening technology for RTMable high-temperature aerospace composites

Yi, X. S., Cheng, Q. F. & Liu, Z. Z., Aug 2012, In: Science China Technological Sciences. 55, 8, p. 2255-2263 9 p.

Research output: Journal Publication › Article › peer-review

15 Citations (Scopus)

Preparation of zinc oxide nanowires on silicon carbide fibers

Zhang, H., Wang, L., Tong, J. & Yi, X., 2012, 2011 Chinese Materials Conference. Elsevier Ltd., p. 1334-1338 5 p. (Procedia Engineering; vol. 27).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

Process simulation and manufacture testing of composite thick-wall drag brace via RTM technology

Liu, G., Luo, C., Li, X., Zhang, D., Lin, S. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 105-112 8 p.

Research output: Journal Publication › Article › peer-review

13 Citations (Scopus)

Properties of toughened RTM composites by structural toughening layer

Zhang, P., Liu, G., Hu, X., Bao, J. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 1-9 9 p.

Research output: Journal Publication › Article › peer-review

23 Citations (Scopus)

Quasi-static indentation damage failure of laminated composites Ex-situ toughened

Ma, H. Y., An, X. F. & Yi, X. S., Sept 2012, In: Cailiao Gongcheng/Journal of Materials Engineering. 9, p. 88-91+98

Research output: Journal Publication › Article › peer-review

2 Citations (Scopus)

Strain monitoring of T-stiffened panels subjected to low-velocity impact using embedded FBG sensors

Zhou, Y., Liu, G., Li, X. & Yi, X., 2012, Applied Mechanics and Mechatronics Automation. p. 1479-1483 5 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Study on the impact damage characteristic of the ex-situ toughened composite laminates

Hongyi, M., Xuefeng, A., Daijun, Z. & Xiaosu, Y., 2012, Applied Mechanics and Mechatronics Automation. p. 65-71 7 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Synthesis and characterization of a polyimide containing phenolphthalein groups

Guo, M. C., Li, S. N., Wang, X. G., Liu, G. & Yi, X. S., Mar 2012, In: Acta Polymerica Sinica. 3, p. 278-283 6 p.

Research output: Journal Publication › Article › peer-review

Open Access

7 Citations (Scopus)

Tailoring of thermal transition temperature and toughening of shape memory epoxy polymer

Deng, H., Gao, J., An, X. & Yi, X., 2012, Applied Mechanics and Mechatronics Automation. p. 93-98 6 p. (Applied Mechanics and Materials; vol. 182-183).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Time and temperature dependence of rheological behavior for thermal PEKC-BMI composite system

Hu, X., Yu, R., Liu, G., Lu, T. & Yi, X., Dec 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 6, p. 37-41 5 p.

Research output: Journal Publication › Article › peer-review

2011

An approach to establish interlaminar micro structure of 3-3 connectivity in laminated composites

Liu, G., Zhang, D. J., Zhang, P. & Yi, X. S., 2011, Advanced Materials and Structures. p. 244-248 5 p. (Advanced Materials Research; vol. 335-336).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Design, manufacturing and testing of composite wing model via integral forming process

Luo, C. Y., Yi, X. S., Li, W. D., Zhou, Y. J., Zhu, Y. G. & Liu, G., Aug 2011, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 31, 4, p. 56-63 8 p.

Research output: Journal Publication › Article › peer-review

7 Citations (Scopus)

Design and manufacture of RTM-made composite wing box based on the water-soluble mandrel

Luo, C., Xiong, J., Yi, X., Zhang, Z., Bao, J., An, X. & Wang, L., Jun 2011, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 28, 3, p. 203-209 7 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Fabrication and validation of collapsible composite lenticular tubes

Bai, J., Xiong, J., Gao, J., Yi, X., Zhang, Z., He, X., Liu, Z. & Li, X., Jul 2011, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 32, 7, p. 1217-1223 7 p.

Research output: Journal Publication › Article › peer-review

11 Citations (Scopus)

Morphology of a functional POSS/bismaleimide nanocomposite and its monitoring phase separation with a thermoplastic blend

Hu, X., Yu, R., Liu, G. & Yi, X., 2011, China Postdoctoral Forum on Materials Science and Engineering. p. 166-170 5 p. (Advanced Materials Research; vol. 266).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Optimized design of composite skin-stiffened structure with large cutout

Luo, C. Y., Xiong, J. J., Yi, X. S., Zhang, Z. L. & Liu, G., Apr 2011, In: Cailiao Gongcheng/Journal of Materials Engineering. 4, p. 9-13 5 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

RTM processing of toughened integral CFRP structures

An, X. F. & Yi, X. S., 2011.

Research output: Contribution to conference › Paper › peer-review

Smart materials of cured epoxy polymer modified by 6F-PEEK with shape memory effect

Gao, J., Zhang, C., He, X., Ma, H., An, X., Yi, X., Dang, G. & Chen, C., 2011, New Materials and Advanced Materials. p. 530-535 6 p. (Advanced Materials Research; vol. 152-153).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

9 Citations (Scopus)

Studies on low-velocity impact damage of metal ion implanted composite laminates

Yan, L., An, X., Cui, H. & Yi, X., 2011, Advanced Materials and Processes. p. 37-42 6 p. (Advanced Materials Research; vol. 311-313).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Study on damage equivalence of composite laminates subjected to low-velocity impact and quasi-static indentation

Yan, L., An, X. F., Cai, J. L., Zhang, D. J. & Yi, X. S., Jun 2011, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 31, 3, p. 71-75 5 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Thermodynamic property of shape memory epoxy resin modified with 6F-PEEK

Gao, J. P., He, X. C., An, X. F., Zhang, C. Q., Yi, X. S., Dang, G. D. & Chen, C. H., Aug 2011, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 31, 4, p. 69-73 5 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

Prof Xiaosu Yi

Research output

Search results