Find Research outputs

2013

Fully computable a posteriori error bounds for stabilised FEM approximations of convection-reaction-diffusion problems in three dimensions

Ainsworth, M., Allendes, A., Barrenechea, G. R. & Rankin, R., 30 Nov 2013, In: International Journal for Numerical Methods in Fluids. 73, 9, p. 765-790 26 p.

Research output: Journal Publication › Article › peer-review

28 Citations (Scopus)

Geometric analysis of a foldable barrel vault with origami

Cai, J., Xu, Y. & Feng, J., 2013, In: Journal of Mechanical Design, Transactions Of the ASME. 135, 11, 114501.

Research output: Journal Publication › Article › peer-review

14 Citations (Scopus)

Glycerol plasticised chitosan: A study of biodegradation via carbon dioxide evolution and nuclear magnetic resonance

Dean, K., Sangwan, P., Way, C., Zhang, X., Martino, V. P., Xie, F., Halley, P. J., Pollet, E. & Avérous, L., Jun 2013, In: Polymer Degradation and Stability. 98, 6, p. 1236-1246 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

31 Citations (Scopus)

Harmonic-resonator-based triboelectric nanogenerator as a sustainable power source and a self-powered active vibration sensor

Chen, J., Zhu, G., Yang, W., Jing, Q., Bai, P., Yang, Y., Hou, T. C. & Wang, Z. L., 13 Nov 2013, In: Advanced Materials. 25, 42, p. 6094-6099 6 p.

Research output: Journal Publication › Article › peer-review

724 Citations (Scopus)

Improvement on the first pass transfer efficiency of fine polymer coating powders for corona spraying process

Fu, J., Zhang, H. & Zhu, J., Nov 2013, In: Advanced Powder Technology. 24, 6, p. 1054-1062 9 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Investigation of resin flowing and infiltration behavior during z direction flowing RTM process

Li, W., Liu, G., An, X. & Yi, X., Dec 2013, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 30, 6, p. 82-89 8 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Kinematic analysis of Hoberman's Linkages with the screw theory

Cai, J., Xu, Y. & Feng, J., 2013, In: Mechanism and Machine Theory. 63, p. 28-34 7 p.

Research output: Journal Publication › Article › peer-review

35 Citations (Scopus)

Low cost, high value reuse of recovered carbon fibres

Pickering, S. J., Turner, T. A., Wong, K. H. & Warrior, N. A., 2013, SAMPE 2013 Conference and Exhibition: Education and Green Sky - Materials Technology for a Better World. p. 433-445 13 p. (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Modeling of the elastic damping response of a carbon nanotube-polymer nanocomposite in the stress-strain domain using an elastic energy release approach based on stick-slip

Spitas, V., Spitas, C. & Michelis, P., 26 Nov 2013, In: Mechanics of Advanced Materials and Structures. 20, 10, p. 791-800 10 p.

Research output: Journal Publication › Article › peer-review

23 Citations (Scopus)

Multi-response parameters optimisation for energy-efficient injection moulding process via dynamic shainin DOE method

Yin, K. H., Choo, H. L., Halim, D. & Rudd, C., 2013, The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales. Trans Tech Publications Ltd, p. 1669-1682 14 p. (Key Engineering Materials; vol. 554-557).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Near-Net-Shape production of hollow titanium alloy components via electrochemical reduction of metal oxide precursors in molten salts

Hu, D., Xiao, W. & Chen, G., Apr 2013, In: Metallurgical and Materials Transactions B. 44, 2, p. 272-282 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

34 Citations (Scopus)

Parametric optimization of the output shaft of a portal axle using finite element analysis

Ooi, J. B., Wang, X., Lim, Y. P., Tan, C. S., Ho, J. H. & Wong, K. C., 2013, In: Strojniski Vestnik/Journal of Mechanical Engineering. 59, 10, p. 613-619 7 p.

Research output: Journal Publication › Article › peer-review

Open Access

7 Citations (Scopus)

Predicting nonlinear stress-strain curves of unidirectional fibrous composites in consideration of stick-slip

Dwaikat, M. M. S., Spitas, C. & Spitas, V., Jan 2013, In: Composites Part B: Engineering. 44, 1, p. 501-507 7 p.

Research output: Journal Publication › Article › peer-review

11 Citations (Scopus)

The development of a surface defect machining method for hard turning processes

Rashid, W. B., Goel, S., Luo, X. & Ritchie, J. M., Apr 2013, In: Wear. 302, 1-2, p. 1124-1135 12 p.

Research output: Journal Publication › Article › peer-review

55 Citations (Scopus)

Towards optimum involute gear design by combining addendum and thickness modifications

Spitas, V. & Spitas, C., 2013, Power Transmissions - Proceedings of the 4th International Conference. Dobre, G. (ed.). Springer Netherlands, p. 173-181 9 p. (Mechanisms and Machine Science; vol. 13).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Use of recycled carbon fibre as a heating element

Pang, E., Pickering, S. J., Chan, A. & Wong, K. H., Jul 2013, In: Journal of Composite Materials. 47, 16, p. 2039-2050 12 p.

Research output: Journal Publication › Article › peer-review

29 Citations (Scopus)

Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process

Goel, S., Luo, X. & Reuben, R. L., Jan 2013, In: Tribology International. 57, p. 272-281 10 p.

Research output: Journal Publication › Article › peer-review

161 Citations (Scopus)

2012

A computational study of the static and dynamic response of a hybrid barrel vault structure

Cai, J., Xu, Y., Wang, F., Feng, J. & Zhang, J., 2012, In: Advanced Steel Construction. 8, 4, p. 317-330 14 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Consideration of concurrent transverse cracking and induced delamination propagation using a generalized micro-meso approach and experimental validation

Hosseini-Toudeshky, H., Farrokhabadi, A. & Mohammadi, B., Sept 2012, In: Fatigue and Fracture of Engineering Materials and Structures. 35, 9, p. 885-901 17 p.

Research output: Journal Publication › Article › peer-review

21 Citations (Scopus)

Determination of size of representative volume element for coke using homogenization method based on digital image of actual microstructure

Zhang, X., Yamazaki, Y., Hiraki, K., Kanai, T., Uchida, A., Saito, Y., Shoji, M., Aoki, H. & Miura, T., 2012, In: ISIJ International. 52, 7, p. 1250-1256 7 p.

Research output: Journal Publication › Article › peer-review

Open Access

Effective structural sizing/shape optimisation through a reliability-related multifactor optimisation approach

Thein, C. K. & Liu, J. S., 2012, In: Multidiscipline Modeling in Materials and Structures. 8, 2, p. 159-177 19 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Experimental and Analytical Study of Free-Fall Drop Impact Testing of Portable Products

Tempelman, E., Dwaikat, M. M. S. & Spitás, C., Nov 2012, In: Experimental Mechanics. 52, 9, p. 1385-1395 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

26 Citations (Scopus)

Fabrication of a zirconia MEMS-based microthruster by gel casting on PDMS soft molds

Cheah, K. H., Khiew, P. S. & Chin, J. K., Sept 2012, In: Journal of Micromechanics and Microengineering. 22, 9, 095013.

Research output: Journal Publication › Article › peer-review

30 Citations (Scopus)

Flexible nanocomposite generator made of BaTiO ₃ nanoparticles and graphitic carbons

Park, K. I., Lee, M., Liu, Y., Moon, S., Hwang, G. T., Zhu, G., Kim, J. E., Kim, S. O., Kim, D. K., Wang, Z. L. & Lee, K. J., 12 Jun 2012, In: Advanced Materials. 24, 22, p. 2999-3004 6 p.

Research output: Journal Publication › Article › peer-review

660 Citations (Scopus)

Implementation of a micro-meso approach for progressive damage analysis of composite laminates

Hosseini-Toudeshky, H., Farrokhabadi, A. & Mohammadi, B., 10 Sept 2012, In: Structural Engineering and Mechanics. 43, 5, p. 657-678 22 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon

Goel, S., Luo, X., Reuben, R. L. & Pen, H., 25 Apr 2012, In: Wear. 284-285, p. 65-72 8 p.

Research output: Journal Publication › Article › peer-review

Open Access

99 Citations (Scopus)

In-plane elastic buckling of shallow parabolic arches under an external load and temperature changes

Cai, J., Xu, Y., Feng, J. & Zhang, J., Nov 2012, In: Journal of Structural Engineering. 138, 11, p. 1300-1309 10 p.

Research output: Journal Publication › Article › peer-review

52 Citations (Scopus)

Manufacture and testing of composite T-joint fabricated via RTM process based on NCF technology

Liu, G., Luo, C., Zhang, D., Zhang, P., Zhang, L. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 99-104 6 p.

Research output: Journal Publication › Article › peer-review

3 Citations (Scopus)

Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation

Ooi, J. B., Wang, X., Tan, C. S., Ho, J. H. & Lim, Y. P., Feb 2012, In: Journal of Mechanical Science and Technology. 26, 2, p. 575-589 15 p.

Research output: Journal Publication › Article › peer-review

34 Citations (Scopus)

Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide

Goel, S., Luo, X. & Reuben, R. L., Jan 2012, In: Computational Materials Science. 51, 1, p. 402-408 7 p.

Research output: Journal Publication › Article › peer-review

144 Citations (Scopus)

Natural modal and stability of integrated composite wing box fabricated by RTM process

Luo, C., Xiong, J., Yi, X., Zhang, Z. & Liu, G., Jun 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 3, p. 158-166 9 p.

Research output: Journal Publication › Article › peer-review

2 Citations (Scopus)

On depression of glass transition temperature of epoxy nanocomposites

Liu, G., Zhang, H., Zhang, D. J., Zhang, Z., An, X. F. & Yi, X. S., Oct 2012, In: Journal of Materials Science. 47, 19, p. 6891-6895 5 p.

Research output: Journal Publication › Article › peer-review

27 Citations (Scopus)

On the existence of A-site deficiency in perovskites and its relation to the electrochemical performance

Konysheva, E. Y., Xu, X. & Irvine, J. T. S., 24 Jan 2012, In: Advanced Materials. 24, 4, p. 528-532 5 p.

Research output: Journal Publication › Article › peer-review

96 Citations (Scopus)

Optical fiber-based core-shell coaxially structured hybrid cells for self-powered nanosystems

Pan, C., Guo, W., Dong, L., Zhu, G. & Wang, Z. L., 3 Jul 2012, In: Advanced Materials. 24, 25, p. 3356-3361 6 p.

Research output: Journal Publication › Article › peer-review

80 Citations (Scopus)

Process simulation and manufacture testing of composite thick-wall drag brace via RTM technology

Liu, G., Luo, C., Li, X., Zhang, D., Lin, S. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 105-112 8 p.

Research output: Journal Publication › Article › peer-review

13 Citations (Scopus)

Progress in nanogenerators for portable electronics

Wang, Z. L., Zhu, G., Yang, Y., Wang, S. & Pan, C., Dec 2012, In: Materials Today. 15, 12, p. 532-543 12 p.

Research output: Journal Publication › Review article › peer-review

Open Access

462 Citations (Scopus)

Properties of toughened RTM composites by structural toughening layer

Zhang, P., Liu, G., Hu, X., Bao, J. & Yi, X., Aug 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 4, p. 1-9 9 p.

Research output: Journal Publication › Article › peer-review

23 Citations (Scopus)

Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon

Goel, S., Luo, X., Reuben, R. L. & Rashid, W. B., 1 Feb 2012, In: Materials Letters. 68, p. 507-509 3 p.

Research output: Journal Publication › Article › peer-review

44 Citations (Scopus)

Simulation study of cutting forces, stresses and temperature during nanometric cutting of single crystal silicon

Goel, S., Luo, X., Reuben, R. L., Rashid, W. B. & Sun, J., 2012, Precision Machining VI. Trans Tech Publications Ltd, p. 223-228 6 p. (Key Engineering Materials; vol. 496).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Single point diamond turning of single crystal silicon carbide: Molecular dynamic simulation study

Goel, S., Luo, X., Reuben, R. L., Rashid, W. B. & Sun, J., 2012, Precision Machining VI. Trans Tech Publications Ltd, p. 150-155 6 p. (Key Engineering Materials; vol. 496).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

14 Citations (Scopus)

Synthesis of vertically aligned ultra-long ZnO nanowires on heterogeneous substrates with catalyst at the root

Zhu, G., Zhou, Y., Wang, S., Yang, R., Ding, Y., Wang, X., Bando, Y. & Wang, Z. L., 10 Feb 2012, In: Nanotechnology. 23, 5, 055604.

Research output: Journal Publication › Article › peer-review

80 Citations (Scopus)

Three-dimensional finite element modeling of tire/ground interaction

Xia, K. & Yang, Y., Mar 2012, In: International Journal for Numerical and Analytical Methods in Geomechanics. 36, 4, p. 498-516 19 p.

Research output: Journal Publication › Article › peer-review

45 Citations (Scopus)

Three-dimensional shakedown solutions for cohesive-frictional materials under moving surface loads

Yu, H. S. & Wang, J., 15 Dec 2012, In: International Journal of Solids and Structures. 49, 26, p. 3797-3807 11 p.

Research output: Journal Publication › Article › peer-review

Open Access

81 Citations (Scopus)

Time and temperature dependence of rheological behavior for thermal PEKC-BMI composite system

Hu, X., Yu, R., Liu, G., Lu, T. & Yi, X., Dec 2012, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 29, 6, p. 37-41 5 p.

Research output: Journal Publication › Article › peer-review

2011

Alignment of discontinuous recycled carbon fibre

Wong, K. H., Pickering, S. J., Turner, T. A. & Warrior, N. A., 2011, 2011 SAMPE Spring Technical Conference and Exhibition - State of the Industry: Advanced Materials, Applications, and Processing Technology. (International SAMPE Technical Conference).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

A model for elastic hysteresis of unidirectional fibrous nano composites incorporating stick-slip

Dwaikat, M. M. S., Spitas, C. & Spitas, V., 15 Dec 2011, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 530, 1, p. 349-356 8 p.

Research output: Journal Publication › Article › peer-review

12 Citations (Scopus)

A new self healing method in composite laminates using the hollow glass fiber

Nademi, M., Mozaffari, A. & Farrokhabadi, A., 2011, Composite Science and Technology. Trans Tech Publications Ltd, p. 548-551 4 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Automated crack detection for digital radiography aircraft wing inspection

Wang, X., Wong, B. S., Tan, C. S. & Tui, C. G., Apr 2011, In: Research in Nondestructive Evaluation. 22, 2, p. 105-127 23 p.

Research output: Journal Publication › Article › peer-review

29 Citations (Scopus)

Crack detection using image processing techniques for radiographic inspection of aircraft wing spar

Stephen Wong, B., Wang, X., Koh, C. M., Tui, C. G., Tan, C. & Xu, J., Oct 2011, In: Insight: Non-Destructive Testing and Condition Monitoring. 53, 10, p. 552-556 5 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

Design and manufacture of RTM-made composite wing box based on the water-soluble mandrel

Luo, C., Xiong, J., Yi, X., Zhang, Z., Bao, J., An, X. & Wang, L., Jun 2011, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 28, 3, p. 203-209 7 p.

Research output: Journal Publication › Article › peer-review

6 Citations (Scopus)

Filters for Research output

Search results