Integrated machine design for electro mechanical actuation

Chris Gerada; Keith Bradley; Chris Whitley; Graham Towers

doi:10.1109/ISIE.2007.4374788

Integrated machine design for electro mechanical actuation

Chris Gerada, Keith Bradley, Chris Whitley, Graham Towers

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

11 Citations (Scopus)

Abstract

This paper describes work on an integrated electro mechanical actuator intended as a technology demonstrator to satisfy future aircraft requirements for a typical mid spoiler actuation system for a large civil aircraft. The design and analysis of a directly coupled motor to a roller screw without any intermediate gear box will be detailed in this paper. The main goals of the design are a high level of actuator integration in order to minimize weight and volume, fault tolerance and high reliability.

Original language	English
Title of host publication	2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings
Pages	1305-1310
Number of pages	6
DOIs	https://doi.org/10.1109/ISIE.2007.4374788
Publication status	Published - 2007
Externally published	Yes
Event	2007 IEEE International Symposium on Industrial Electronics, ISIE 2007 - Caixanova - Vigo, Spain Duration: 4 Jun 2007 → 7 Jun 2007

Publication series

Name	IEEE International Symposium on Industrial Electronics

Conference

Conference	2007 IEEE International Symposium on Industrial Electronics, ISIE 2007
Country/Territory	Spain
City	Caixanova - Vigo
Period	4/06/07 → 7/06/07

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/ISIE.2007.4374788

Cite this

Gerada, C., Bradley, K., Whitley, C., & Towers, G. (2007). Integrated machine design for electro mechanical actuation. In 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings (pp. 1305-1310). Article 4374788 (IEEE International Symposium on Industrial Electronics). https://doi.org/10.1109/ISIE.2007.4374788

@inproceedings{35fc8766fda6493595a98ca7bdaf5de4,

title = "Integrated machine design for electro mechanical actuation",

abstract = "This paper describes work on an integrated electro mechanical actuator intended as a technology demonstrator to satisfy future aircraft requirements for a typical mid spoiler actuation system for a large civil aircraft. The design and analysis of a directly coupled motor to a roller screw without any intermediate gear box will be detailed in this paper. The main goals of the design are a high level of actuator integration in order to minimize weight and volume, fault tolerance and high reliability.",

author = "Chris Gerada and Keith Bradley and Chris Whitley and Graham Towers",

year = "2007",

doi = "10.1109/ISIE.2007.4374788",

language = "English",

isbn = "1424407559",

series = "IEEE International Symposium on Industrial Electronics",

pages = "1305--1310",

booktitle = "2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings",

note = "2007 IEEE International Symposium on Industrial Electronics, ISIE 2007 ; Conference date: 04-06-2007 Through 07-06-2007",

}

Gerada, C, Bradley, K, Whitley, C & Towers, G 2007, Integrated machine design for electro mechanical actuation. in 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings., 4374788, IEEE International Symposium on Industrial Electronics, pp. 1305-1310, 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Caixanova - Vigo, Spain, 4/06/07. https://doi.org/10.1109/ISIE.2007.4374788

Integrated machine design for electro mechanical actuation. / Gerada, Chris; Bradley, Keith; Whitley, Chris et al.
2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings. 2007. p. 1305-1310 4374788 (IEEE International Symposium on Industrial Electronics).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Integrated machine design for electro mechanical actuation

AU - Gerada, Chris

AU - Bradley, Keith

AU - Whitley, Chris

AU - Towers, Graham

PY - 2007

Y1 - 2007

N2 - This paper describes work on an integrated electro mechanical actuator intended as a technology demonstrator to satisfy future aircraft requirements for a typical mid spoiler actuation system for a large civil aircraft. The design and analysis of a directly coupled motor to a roller screw without any intermediate gear box will be detailed in this paper. The main goals of the design are a high level of actuator integration in order to minimize weight and volume, fault tolerance and high reliability.

AB - This paper describes work on an integrated electro mechanical actuator intended as a technology demonstrator to satisfy future aircraft requirements for a typical mid spoiler actuation system for a large civil aircraft. The design and analysis of a directly coupled motor to a roller screw without any intermediate gear box will be detailed in this paper. The main goals of the design are a high level of actuator integration in order to minimize weight and volume, fault tolerance and high reliability.

UR - http://www.scopus.com/inward/record.url?scp=50049091219&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2007.4374788

DO - 10.1109/ISIE.2007.4374788

M3 - Conference contribution

AN - SCOPUS:50049091219

SN - 1424407559

SN - 9781424407552

T3 - IEEE International Symposium on Industrial Electronics

SP - 1305

EP - 1310

BT - 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Proceedings

T2 - 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007

Y2 - 4 June 2007 through 7 June 2007

ER -

Integrated machine design for electro mechanical actuation

Abstract

Publication series

Conference

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this