Find Research outputs - University of Nottingham Ningbo China

Clear all

24 results
Export search results

2007
A 5-phase fault-tolerant brushless permanent magnet motor drive for an aircraft thin wing surface actuator
Gerada, C., Bradley, K., Xiaoyan, H., Goodman, A., Whitley, C. & Towers, G., 2007, Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007. p. 1643-1648 6 p. 4270896. (Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007; vol. 2).
Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
14 Citations (Scopus)
A decision support system for supplier selection in the airline industry
Chan, F. T. S., Chan, H. K., Ip, R. W. L. & Lau, H. C. W., 2007, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 221, 4, p. 741-758 18 p.
Research output: Journal Publication › Article › peer-review
102 Citations (Scopus)
A FEM study of the bending strength of circular fillet gear teeth compared to trochoidal fillets produced with enlarged cutter tip radius
Spitas, C. & Spitas, V., Jan 2007, In: Mechanics Based Design of Structures and Machines. 35, 1, p. 59-73 15 p.
Research output: Journal Publication › Article › peer-review
35 Citations (Scopus)
An experimental analysis of damped coupled vibrations in broaching
Axinte, D. A., Nov 2007, In: International Journal of Machine Tools and Manufacture. 47, 14, p. 2182-2188 7 p.
Research output: Journal Publication › Article › peer-review
28 Citations (Scopus)
Applicability of linear type revised k-ε models to flow over topographic features
Lun, Y. F., Mochida, A., Yoshino, H. & Murakami, S., May 2007, In: Journal of Wind Engineering and Industrial Aerodynamics. 95, 5, p. 371-384 14 p.
Research output: Journal Publication › Article › peer-review
15 Citations (Scopus)
Chromium vaporization of the ferritic steel Crofer22APU and ODS Cr5Fe1Y₂O₃ alloy
Konysheva, E., Seeling, U., Besmehn, A., Singheiser, L. & Hilpert, K., Jul 2007, In: Journal of Materials Science. 42, 14, p. 5778-5784 7 p.
Research output: Journal Publication › Article › peer-review
35 Citations (Scopus)
Conducting and superhydrophobic rambutan-like hollow spheres of polyaniline
Zhu, Y., Hu, D., Wan, M., Jiang, L. & Wei, Y., 17 Aug 2007, In: Advanced Materials. 19, 16, p. 2092-2096 5 p.
Research output: Journal Publication › Article › peer-review
328 Citations (Scopus)
Development of an online machining process monitoring system: A case study of the broaching process
Shi, D., Axinte, D. A. & Gindy, N. N., Aug 2007, In: International Journal of Advanced Manufacturing Technology. 34, 1-2, p. 34-46 13 p.
Research output: Journal Publication › Article › peer-review
33 Citations (Scopus)
Fast modeling of conjugate gear tooth profiles using discrete presentation by involute segments
Spitas, V., Costopoulos, T. & Spitas, C., Jun 2007, In: Mechanism and Machine Theory. 42, 6, p. 751-762 12 p.
Research output: Journal Publication › Article › peer-review
30 Citations (Scopus)
Four-parametric design study of the bending strength of circular-fillet versus trochoidal-fillet in gear tooth design using BEM
Spitas, V. & Spitas, C., Apr 2007, In: Mechanics Based Design of Structures and Machines. 35, 2, p. 163-178 16 p.
Research output: Journal Publication › Article › peer-review
19 Citations (Scopus)
High frequency spatial vibration control using H_∞ method
Barrault, G., Halim, D. & Hansen, C., May 2007, In: Mechanical Systems and Signal Processing. 21, 4, p. 1541-1560 20 p.
Research output: Journal Publication › Article › peer-review
11 Citations (Scopus)
Investigating the use of vertical vibration to recover metal from electrical and electronic waste
Mohabuth, N., Hall, P. & Miles, N., Aug 2007, In: Minerals Engineering. 20, 9 SPEC. ISS., p. 926-932 7 p.
Research output: Journal Publication › Article › peer-review
41 Citations (Scopus)
Numerical and experimental comparative study of strength-optimised AGMA and FZG spur gears
Spitas, V. & Spitas, C., Sept 2007, In: Acta Mechanica. 193, 1-2, p. 113-126 14 p.
Research output: Journal Publication › Article › peer-review
17 Citations (Scopus)
Numerical simulation for drop shape on the surface with gradient surface energy
Zhu, X., Fan, Y., Liao, Q. & Shi, Y., May 2007, In: Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics. 28, 3, p. 484-486 3 p.
Research output: Journal Publication › Article › peer-review
1 Citation (Scopus)
Optimal truncated model for vibration control design within a specified bandwidth
Barrault, G., Halim, D., Hansen, C. & Lenzi, A., Jul 2007, In: International Journal of Solids and Structures. 44, 14-15, p. 4673-4689 17 p.
Research output: Journal Publication › Article › peer-review

Open Access
Optimizing involute gear design for maximum bending strength and equivalent pitting resistance
Spitas, V. & Spitas, C., Apr 2007, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 221, 4, p. 479-488 10 p.
Research output: Journal Publication › Article › peer-review
26 Citations (Scopus)
Robust fault detection observer design: Iterative LMI approaches
Wang, H. B., Wang, J. L. & Lam, J., Jan 2007, In: Journal of Dynamic Systems, Measurement and Control. 129, 1, p. 77-82 6 p.
Research output: Journal Publication › Article › peer-review
54 Citations (Scopus)
Silicon nanowire band gap modification
Nolan, M., O'Callaghan, S., Fagas, G., Greer, J. C. & Frauenheim, T., Jan 2007, In: Nano Letters. 7, 1, p. 34-38 5 p.
Research output: Journal Publication › Article › peer-review

Open Access
218 Citations (Scopus)
Some considerations on tool wear and workpiece surface quality of holes finished by reaming or milling in a nickel base superalloy
Axinte, D. A. & Andrews, P., 2007, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 221, 4, p. 591-603 13 p.
Research output: Journal Publication › Article › peer-review
38 Citations (Scopus)
Structural vibration control with spatially varied disturbance input using a spatial H_∞ method
Halim, D., Aug 2007, In: Mechanical Systems and Signal Processing. 21, 6, p. 2496-2514 19 p.
Research output: Journal Publication › Article › peer-review
10 Citations (Scopus)
Study on the measurement and control system of solid state fermentation bioreactor with pressure pulsation
Liu, J., Li, D. & Yang, J., Oct 2007, In: Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery. 38, 10, p. 99-103 5 p.
Research output: Journal Publication › Article › peer-review
Theoretical analysis and simulation of airflow of super high-speed grinding wheel
Gong, Y. D., Li, H. & Cai, G. Q., 2007, In: Key Engineering Materials. 329, p. 507-510 4 p.
Research output: Journal Publication › Article › peer-review
3 Citations (Scopus)
Tunnelling in alkanes anchored to gold electrodes via amine end groups
Fagas, G. & Greer, J. C., 24 Oct 2007, In: Nanotechnology. 18, 42, 424010.
Research output: Journal Publication › Article › peer-review

Open Access
38 Citations (Scopus)
Validation of a numerical model for the simulation of an electrostatic powder coating process
Shah, U., Zhang, C., Zhu, J., Wang, F. & Martinuzzi, R., May 2007, In: International Journal of Multiphase Flow. 33, 5, p. 557-573 17 p.
Research output: Journal Publication › Article › peer-review
15 Citations (Scopus)