Find Research outputs

2005

A hbrid route to chiratty pure products

Wibowo, C. & O'Young, L., Nov 2005, Chemical Engineering Progress, 101, 11, p. 22-27 6 p.

Research output: Contribution to specialist publication › Article

5 Citations (Scopus)

An approach to use an array of three acoustic emission sensors to locate uneven events in machining - Part 1: Method and validation

Axinte, D. A., Natarajan, D. R. & Gindy, N. N. Z., Nov 2005, In: International Journal of Machine Tools and Manufacture. 45, 14, p. 1605-1613 9 p.

Research output: Journal Publication › Article › peer-review

42 Citations (Scopus)

An example of selection of the cutting conditions in broaching of heat-resistant alloys based on cutting forces, surface roughness and tool wear

Mo, S. P., Axinte, D. A., Hyde, T. H. & Gindy, N. N. Z., 30 Mar 2005, In: Journal of Materials Processing Technology. 160, 3, p. 382-389 8 p.

Research output: Journal Publication › Article › peer-review

50 Citations (Scopus)

An improved stator flux estimation for a variable structure direct torque controlled IPM synchronous motor drive using a sliding observer

Xu, Z. & Rahman, M. F., 2005, Conference Record of the 2005 IEEE Industry Applications Conference, 40th IAS Annual Meeting. p. 2484-2490 7 p. 1518809. (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society); vol. 4).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

16 Citations (Scopus)

An investigation into the suitability of unbalanced motor operation, the Eh-star-circuit for stray load loss measurement

Gerada, C., Bradley, K. & Arellano-Padilla, J., 2005, Conference Record of the 2005 IEEE Industry Applications Conference, 40th IAS Annual Meeting. p. 1329-1336 8 p. 1518532. (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society); vol. 2).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

Broaching of Ti-6-4 - Detection of workpiece surface anomalies on dovetail slots through process monitoring

Axinte, D., Boud, F., Penny, J., Gindy, N. & Williams, D. J., 2005, In: CIRP Annals - Manufacturing Technology. 54, 1, p. 87-90 4 p.

Research output: Journal Publication › Article › peer-review

33 Citations (Scopus)

Bubble sizes in agitated air-alcohol systems with and without particles: Turbulent and transitional flow

Hu, B., Pacek, A. W., Stitt, E. H. & Nienow, A. W., Nov 2005, In: Chemical Engineering Science. 60, 22, p. 6371-6377 7 p.

Research output: Journal Publication › Conference article › peer-review

22 Citations (Scopus)

Eulerian-Lagrangian simulations of liquid-gas-solid flows in three-phase slurry reactors

Zhang, X. & Ahmadi, G., Sept 2005, In: Chemical Engineering Science. 60, 18, p. 5089-5104 16 p.

Research output: Journal Publication › Article › peer-review

109 Citations (Scopus)

Experimental and theoretical study on the agglomeration arising from fluidization of cohesive particles - Effects of mechanical vibration

Xu, C. & Zhu, J., Dec 2005, In: Chemical Engineering Science. 60, 23, p. 6529-6541 13 p.

Research output: Journal Publication › Article › peer-review

111 Citations (Scopus)

Implementation of total productive maintenance: A case study

Chan, F. T. S., Lau, H. C. W., Ip, R. W. L., Chan, H. K. & Kong, S., 28 Jan 2005, In: International Journal of Production Economics. 95, 1, p. 71-94 24 p.

Research output: Journal Publication › Article › peer-review

287 Citations (Scopus)

Investigations on belt polishing of heat-resistant titanium alloys

Axinte, D. A., Kritmanorot, M., Axinte, M. & Gindy, N. N. Z., 20 Aug 2005, In: Journal of Materials Processing Technology. 166, 3, p. 398-404 7 p.

Research output: Journal Publication › Article › peer-review

60 Citations (Scopus)

Scale-up effect of riser reactors (3) axial and radial solids flux distribution and flow development

Yan, A., Ball, J. & Zhu, J., 1 May 2005, In: Chemical Engineering Journal. 109, 1, p. 97-106 10 p.

Research output: Journal Publication › Article › peer-review

34 Citations (Scopus)

Simulation modeling for comparative evaluation of supply chain management strategies

Chan, F. T. S. & Chan, H. K., May 2005, In: International Journal of Advanced Manufacturing Technology. 25, 9-10, p. 998-1006 9 p.

Research output: Journal Publication › Article › peer-review

37 Citations (Scopus)

The future trend on system-wide modelling in supply chain studies

Chan, F. T. S. & Chan, H. K., Apr 2005, In: International Journal of Advanced Manufacturing Technology. 25, 7-8, p. 820-832 13 p.

Research output: Journal Publication › Article › peer-review

53 Citations (Scopus)

The modifications of a plane mixing layer by condensed bubbles

Yang, X., Huang, X., Rielly, C., Zouaoui, Z. & Guo, L., Dec 2005, In: Chemical Engineering Science. 60, 24, p. 6876-6886 11 p.

Research output: Journal Publication › Article › peer-review

5 Citations (Scopus)

The study of industrial powder coating booth designs with numerical simulations

Shah, U., Zhu, J. & Zhang, C., Jun 2005, In: Metal Finishing. 103, 6, p. 20-28 9 p.

Research output: Journal Publication › Article › peer-review

1 Citation (Scopus)

Transition from low velocity to high velocity in a three phase fluidized bed

Zheng, Y., Zhu, J. & Wushouer, A., Sept 2005, In: Chemical Engineering and Technology. 28, 9, p. 1010-1015 6 p.

Research output: Journal Publication › Article › peer-review

4 Citations (Scopus)

Winding turn-to-turn faults in permanent magnet synchronous machine drives

Gerada, C., Bradley, K. & Sumner, M., 2005, Conference Record of the 2005 IEEE Industry Applications Conference, 40th IAS Annual Meeting. p. 1029-1036 8 p. 1518481. (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society); vol. 2).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

45 Citations (Scopus)

Filters for Research output

Search results