Research output per year
Research output per year
- 100 - 150 out of 160 results
Search results
-
2020
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y. & Thakur, V. K., Jun 2020, In: Materials Today Chemistry. 16, 100248.Research output: Journal Publication › Review article › peer-review
Open Access386 Citations (Scopus) -
Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials
Goel, S., Knaggs, M., Goel, G., Zhou, X. W., Upadhyaya, H. M., Thakur, V. K., Kumar, V., Bizarri, G., Tiwari, A., Murphy, A., Stukowski, A. & Matthews, A., Dec 2020, In: Materials Today Chemistry. 18, 100356.Research output: Journal Publication › Article › peer-review
Open Access17 Citations (Scopus) -
On the use of the theory of critical distances with mesh control for fretting fatigue lifetime assessment
Zabala, A., Infante-García, D., Giner, E., Goel, S., Endrino, J. L. & Llavori, I., Feb 2020, In: Tribology International. 142, 105985.Research output: Journal Publication › Article › peer-review
Open Access29 Citations (Scopus) -
Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic
Goel, S., Hawi, S., Goel, G., Thakur, V. K., Agrawal, A., Hoskins, C., Pearce, O., Hussain, T., Upadhyaya, H. M., Cross, G. & Barber, A. H., Sept 2020, In: Materials Today Chemistry. 17, 100300.Research output: Journal Publication › Article › peer-review
Open Access74 Citations (Scopus) -
Surface defects incorporated diamond machining of silicon
Khatri, N., Barkachary, B. M., Muneeswaran, B., Al-Sayegh, R., Luo, X. & Goel, S., Dec 2020, In: International Journal of Extreme Manufacturing. 2, 4, 045102.Research output: Journal Publication › Article › peer-review
Open Access23 Citations (Scopus) -
The critical raw materials in cutting tools for machining applications: A review
Rizzo, A., Goel, S., Grilli, M. L., Iglesias, R., Jaworska, L., Lapkovskis, V., Novak, P., Postolnyi, B. O. & Valerini, D., 1 Mar 2020, In: Materials. 13, 6, 1377.Research output: Journal Publication › Review article › peer-review
Open Access130 Citations (Scopus) -
Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloy
Kumar, D., Goel, S., Gosvami, N. N. & Jain, J., May 2020, In: Materialia. 10, 100640.Research output: Journal Publication › Article › peer-review
Open Access16 Citations (Scopus) -
2019
Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V
Liu, C., Goel, S., Llavori, I., Stolf, P., Giusca, C. L., Zabala, A., Kohlscheen, J., Paiva, J. M., Endrino, J. L., Veldhuis, S. C. & Fox Rabinovich, G. S., Sept 2019, In: Journal of the Mechanical Behavior of Biomedical Materials. 97, p. 126-137 12 p.Research output: Journal Publication › Article › peer-review
Open Access20 Citations (Scopus) -
Fabrication of functionalised surfaces on Gum metal (Ti-30Nb) using micromachining
Hawi, S., Dickins, A., Pardal, G. R., Giusca, C., Pearce, O. & Goel, S., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 108-111 4 p. (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019).Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
-
Improved and simpler estimation of scale linearity contribution to topography measurement
Giusca, C. L. & Goel, S., Nov 2019, In: Precision Engineering. 60, p. 368-373 6 p.Research output: Journal Publication › Article › peer-review
Open Access6 Citations (Scopus) -
Suppressing scratch-induced brittle fracture in silicon by geometric design modification of the abrasive grits
Kovalchenko, A. M., Goel, S., Zakiev, I. M., Pashchenko, E. A. & Al-Sayegh, R., Jan 2019, In: Journal of Materials Research and Technology. 8, 1, p. 703-712 10 p.Research output: Journal Publication › Article › peer-review
Open Access27 Citations (Scopus) -
Suppressing the use of critical raw materials in joining of AISI 304 stainless steel using activated tungsten inert gas welding
Balos, S., Dramicanin, M., Janjatovic, P., Zabunov, I., Pilic, B., Goel, S. & Szutkowska, M., Nov 2019, In: Metals. 9, 11, 1187.Research output: Journal Publication › Article › peer-review
Open Access4 Citations (Scopus) -
The role of high-pressure coolant in the wear characteristics of WC-Co tools during the cutting of Ti–6Al–4V
Stolf, P., Paiva, J. M., Ahmed, Y. S., Endrino, J. L., Goel, S. & Veldhuis, S. C., 15 Dec 2019, In: Wear. 440-441, 203090.Research output: Journal Publication › Article › peer-review
Open Access25 Citations (Scopus) -
2018
Comment on "incipient plasticity of diamond during nanoindentation" by C. Xu, C. Liu and H. Wang, RSC Advances, 2017, 7, 36093
Goel, S. & Stukowski, A., 2018, In: RSC Advances. 8, 10, p. 5136-5137 2 p.Research output: Journal Publication › Review article › peer-review
Open Access4 Citations (Scopus) -
Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten
Goel, S., Cross, G., Stukowski, A., Gamsjäger, E., Beake, B. & Agrawal, A., Sept 2018, In: Computational Materials Science. 152, p. 196-210 15 p.Research output: Journal Publication › Article › peer-review
Open Access46 Citations (Scopus) -
Future of nanoindentation in archaeometry
Faisal, N. H., Ahmed, R., Goel, S. & Cross, G., 14 Sept 2018, In: Journal of Materials Research. 33, 17, p. 2515-2532 18 p.Research output: Journal Publication › Review article › peer-review
8 Citations (Scopus) -
Incipient plasticity in tungsten during nanoindentation: Dependence on surface roughness, probe radius and crystal orientation
Beake, B. D. & Goel, S., Sept 2018, In: International Journal of Refractory Metals and Hard Materials. 75, p. 63-69 7 p.Research output: Journal Publication › Article › peer-review
Open Access25 Citations (Scopus) -
Manufacturing uncertainty: How reproducible is the depth of cut during diamond turning of OFHC copper?
Zhao, J., Giusca, C. & Goel, S., 2018, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 387-388 2 p. (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018).Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
-
Preface
Ruello, M. L., Valerini, D., Goel, S. & Kivikytö-Reponen, P., 26 Mar 2018, In: IOP Conference Series: Materials Science and Engineering. 329, 1, 011001.Research output: Journal Publication › Editorial
Open Access -
The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data
Goel, S., Llavori, I., Zabala, A., Giusca, C., Veldhuis, S. C. & Endrino, J. L., Nov 2018, In: International Journal of Machine Tools and Manufacture. 134, p. 79-80 2 p.Research output: Journal Publication › Letter › peer-review
Open Access4 Citations (Scopus) -
2017
Addressing the discrepancy of finding the equilibrium melting point of silicon using molecular dynamics simulations
Chavoshi, S. Z., Xu, S. & Goel, S., 2017, In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 473, 2202, 20170084.Research output: Journal Publication › Article › peer-review
Open Access38 Citations (Scopus) -
Current trends and future of sequential micro-machining processes on a single machine tool
Chavoshi, S. Z., Goel, S. & Morantz, P., 5 Aug 2017, In: Materials and Design. 127, p. 37-53 17 p.Research output: Journal Publication › Article › peer-review
Open Access48 Citations (Scopus) -
Cyclic Nanoindentation and Nano-Impact Fatigue Mechanisms of Functionally Graded TiN/TiNi Film
Faisal, N. H., Prathuru, A. K., Goel, S., Ahmed, R., Droubi, M. G., Beake, B. D. & Fu, Y. Q., 1 Jun 2017, In: Shape Memory and Superelasticity. 3, 2, p. 149-167 19 p.Research output: Journal Publication › Article › peer-review
Open Access41 Citations (Scopus) -
2016
Advances in the surface defect machining (SDM) of hard steels
Rashid, W. B. & Goel, S., 1 Aug 2016, In: Journal of Manufacturing Processes. 23, p. 37-46 10 p.Research output: Journal Publication › Article › peer-review
Open Access18 Citations (Scopus) -
Influence of microstructure on the cutting behaviour of silicon
Goel, S., Kovalchenko, A., Stukowski, A. & Cross, G., 15 Feb 2016, In: Acta Materialia. 105, p. 464-478 15 p.Research output: Journal Publication › Article › peer-review
Open Access187 Citations (Scopus) -
Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation
Chavoshi, S. Z., Goel, S. & Luo, X., 1 Aug 2016, In: Journal of Manufacturing Processes. 23, p. 201-210 10 p.Research output: Journal Publication › Article › peer-review
Open Access95 Citations (Scopus) -
Molecular dynamics simulation (MDS) to study nanoscale cutting processes
Goel, S., Chavoshi, S. Z. & Murphy, A., 12 Dec 2016, Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes. CRC Press, p. 499-547 49 p.Research output: Chapter in Book/Conference proceeding › Book Chapter › peer-review
2 Citations (Scopus) -
Parametric design optimization of hard turning of AISI 4340 steel (69 HRC)
Rashid, W. B., Goel, S., Davim, J. P. & Joshi, S. N., 1 Jan 2016, In: International Journal of Advanced Manufacturing Technology. 82, 1-4, p. 451-462 12 p.Research output: Journal Publication › Article › peer-review
69 Citations (Scopus) -
Self-healing of cracks during ductile regime machining of silicon: Insights from molecular dynamics simulation
Goel, S., Stukowski, A., Kovalchenko, A. & Cross, G., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). euspen, (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
7 Citations (Scopus) -
2015
Diamond machining of silicon: A review of advances in molecular dynamics simulation
Goel, S., Luo, X., Agrawal, A. & Reuben, R. L., 1 Jan 2015, In: International Journal of Machine Tools and Manufacture. 88, p. 131-164 34 p.Research output: Journal Publication › Review article › peer-review
Open Access356 Citations (Scopus) -
Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting
Chavoshi, S. Z., Goel, S. & Luo, X., 16 Nov 2015, In: Modelling and Simulation in Materials Science and Engineering. 24, 1, 015002.Research output: Journal Publication › Article › peer-review
Open Access55 Citations (Scopus) -
Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)
Agrawal, A., Goel, S., Rashid, W. B. & Price, M., May 2015, In: Applied Soft Computing Journal. 30, p. 279-286 8 p.Research output: Journal Publication › Article › peer-review
Open Access154 Citations (Scopus) -
Twinning anisotropy of tantalum during nanoindentation
Goel, S., Beake, B., Chan, C. W., Haque Faisal, N. & Dunne, N., 1 Mar 2015, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 627, p. 249-261 13 p.Research output: Journal Publication › Article › peer-review
Open Access74 Citations (Scopus) -
2014
A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide
Goel, S., Rashid, W. B., Luo, X., Agrawal, A. & Jain, V. K., Apr 2014, In: Journal of Manufacturing Science and Engineering. 136, 2, 021015.Research output: Journal Publication › Article › peer-review
45 Citations (Scopus) -
Atomistic investigation on the structure-property relationship during thermal spray nanoparticle impact
Goel, S., Faisal, N. H., Ratia, V., Agrawal, A. & Stukowski, A., Mar 2014, In: Computational Materials Science. 84, p. 163-174 12 p.Research output: Journal Publication › Article › peer-review
Open Access36 Citations (Scopus) -
Can a carbon nano-coating resist metallic phase transformation in silicon substrate during nanoimpact?
Goel, S., Agrawal, A. & Faisal, N. H., 15 Jul 2014, In: Wear. 315, 1-2, p. 38-41 4 p.Research output: Journal Publication › Article › peer-review
Open Access5 Citations (Scopus) -
Enabling ultra high precision on hard steels using surface defect machining
Rashid, W. B., Goel, S. & Luo, X., 2014, Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. Leach, R. (ed.). euspen, p. 359-362 4 p. (Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014; vol. 2).Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
1 Citation (Scopus) -
Incipient plasticity in 4H-SiC during quasistatic nanoindentation
Goel, S., Yan, J., Luo, X. & Agrawal, A., Jun 2014, In: Journal of the Mechanical Behavior of Biomedical Materials. 34, p. 330-337 8 p.Research output: Journal Publication › Article › peer-review
Open Access47 Citations (Scopus) -
Influence of test methodology and probe geometry on nanoscale fatigue failure of diamond-like carbon film
Faisal, N. H., Ahmed, R., Goel, S. & Fu, Y. Q., 15 Mar 2014, In: Surface and Coatings Technology. 242, p. 42-53 12 p.Research output: Journal Publication › Article › peer-review
Open Access28 Citations (Scopus) -
Molecular dynamics simulation of nanoindentation of Fe3C and Fe4C
Goel, S., Joshi, S. S., Abdelal, G. & Agrawal, A., 12 Mar 2014, In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 597, p. 331-341 11 p.Research output: Journal Publication › Article › peer-review
Open Access62 Citations (Scopus) -
Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation
Goel, S., Haque Faisal, N., Luo, X., Yan, J. & Agrawal, A., 9 Jul 2014, In: Journal Physics D: Applied Physics. 47, 27, 275304.Research output: Journal Publication › Article › peer-review
Open Access101 Citations (Scopus) -
The current understanding on the diamond machining of silicon carbide
Goel, S., 18 Jun 2014, In: Journal Physics D: Applied Physics. 47, 24, 243001.Research output: Journal Publication › Review article › peer-review
Open Access155 Citations (Scopus) -
2013
An experimental investigation for the improvement of attainable surface roughness during hard turning process
Rashid, W. B., Goel, S., Luo, X. & Ritchie, J. M., Feb 2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 2, p. 338-342 5 p.Research output: Journal Publication › Article › peer-review
45 Citations (Scopus) -
Anisotropy of single-crystal 3C-SiC during nanometric cutting
Goel, S., Stukowski, A., Luo, X., Agrawal, A. & Reuben, R. L., Sept 2013, In: Modelling and Simulation in Materials Science and Engineering. 21, 6, 065004.Research output: Journal Publication › Article › peer-review
97 Citations (Scopus) -
Brittle-ductile transition during diamond turning of single crystal silicon carbide
Goel, S., Luo, X., Comley, P., Reuben, R. L. & Cox, A., Feb 2013, In: International Journal of Machine Tools and Manufacture. 65, p. 15-21 7 p.Research output: Journal Publication › Article › peer-review
Open Access186 Citations (Scopus) -
Development of the surface defect machining method for micro/nano scale material removal processes
Goel, S., Rashid, W. B., Mir, A., Zeng, S., Sun, J. & Luo, X., 2013, Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013. Leach, R. & Shore, P. (eds.). euspen, Vol. 2. p. 348-351 4 p.Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review
1 Citation (Scopus) -
The development of a surface defect machining method for hard turning processes
Rashid, W. B., Goel, S., Luo, X. & Ritchie, J. M., Apr 2013, In: Wear. 302, 1-2, p. 1124-1135 12 p.Research output: Journal Publication › Article › peer-review
54 Citations (Scopus) -
Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process
Goel, S., Luo, X. & Reuben, R. L., Jan 2013, In: Tribology International. 57, p. 272-281 10 p.Research output: Journal Publication › Article › peer-review
157 Citations (Scopus) -
2012
An investigation on the colossal success of Larsen and Toubro Limited: Human resource management perspective
Goel, S. & Parmar, A., Dec 2012, In: Pertanika Journal of Social Science and Humanities. 20, 4, p. 1261-1274 14 p.Research output: Journal Publication › Article › peer-review
1 Citation (Scopus) -
A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide
Luo, X., Goel, S. & Reuben, R. L., Sept 2012, In: Journal of the European Ceramic Society. 32, 12, p. 3423-3434 12 p.Research output: Journal Publication › Article › peer-review
Open Access156 Citations (Scopus)