Stochastic modelling of abrasive waterjet footprints using finite element analysis

P. Lozano Torrubia, D. A. Axinte, J. Billingham

Research output: Journal PublicationArticlepeer-review

30 Citations (Scopus)

Abstract

The proposal of erosion models to predict the jet footprint during abrasive waterjet machining is a key element for the development of this technology, but it is very challenging because of the inherent fluctuations of the process. This issue becomes critical when the size of the cutting systems is reduced, since the relative size of these deviations increases. The present paper considers for the first time a modelling framework capable of predicting the average shape of AWJM footprints and, of great novelty, the variability along the trench, combining finite element analysis and Monte Carlo methods, and verifying the model using different feed speeds and tilt angles. For that purpose, the relevance of each random parameter, such as shape (sharpness), size and relative orientation of the abrasive particles, has been investigated through parametric studies on these variables. Multiple particle simulations with randomly generated input were performed to determine the effect of operating parameters in the overall variability of the jet footprint. The process was simulated using Abaqus 6.14 as multiple garnet particles hitting a target of Ti-6Al-4V at very high velocity, eroding the target by plastic deformation and material removal. The model shows successfully the influence of single particle parameters, such as the shape, on the surface variability. The results for the footprint variability show that stochastic methods are suitable to model these fluctuations, and it is also shown that this approach yields accurate estimates of the average profile after multiple jet passes with error less than 5%.

Original languageEnglish
Pages (from-to)39-51
Number of pages13
JournalInternational Journal of Machine Tools and Manufacture
Volume95
DOIs
Publication statusPublished - 30 May 2015
Externally publishedYes

Keywords

  • Abrasive waterjet milling
  • Finite element modelling
  • Monte Carlo methods
  • Stochastic modelling

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'Stochastic modelling of abrasive waterjet footprints using finite element analysis'. Together they form a unique fingerprint.

Cite this