Phase holdup measurement in a gas-liquid-solid circulating fluidized bed (GLSCFB) riser using electrical resistance tomography and optical fibre probe

S. A. Razzak, S. Barghi, J. X. Zhu, Y. Mi

Research output: Journal PublicationArticlepeer-review

66 Citations (Scopus)

Abstract

Phase holdups were measured in the riser section of a gas-liquid-solid circulating fluidized bed (GLSCFB). Electrical resistance tomography (ERT) as a non-invasive imaging technique, pressure transducers (PTs) and fibre optic probes were employed. Water was used as continuous and conductive phase, air as the gas phase and glass beads as solid nonconductive phases. ERT technique is based on conductivity measurement of the continuous phase (water in this study), which provides color-coded cross-sectional view of phases with a frequency of up to 250 images per second. The local conductivity measured by a number of electrodes located at the periphery of the plane was then further converted into a local phase concentration distribution based on Maxwell's relation. The results obtained by PTs, when combined with ERT results, were used to determine gas and solid holdups. Fibre optic probe was also employed to measure gas holdup independently. To measure gas and solid holdup, a model was introduced to exploit the fibre optic data in differentiating gas bubbles from solid particles in the riser. Radial profiles of the phase holdups were determined. Crown

Original languageEnglish
Pages (from-to)210-218
Number of pages9
JournalChemical Engineering Journal
Volume147
Issue number2-3
DOIs
Publication statusPublished - 15 Apr 2009
Externally publishedYes

Keywords

  • Circulating fluidized bed
  • Electrical resistance tomography
  • Fibre optic
  • Phase holdup

ASJC Scopus subject areas

  • General Chemistry
  • Environmental Chemistry
  • General Chemical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'Phase holdup measurement in a gas-liquid-solid circulating fluidized bed (GLSCFB) riser using electrical resistance tomography and optical fibre probe'. Together they form a unique fingerprint.

Cite this