Sol-gel synthesis and spark plasma sintering of Ba0.5Sr 0.5TiO3

Cai Shen; Qing Feng Liu; Qian Liu

doi:10.1016/j.matlet.2004.02.009

Sol-gel synthesis and spark plasma sintering of Ba_0.5Sr _0.5TiO₃

Cai Shen, Qing Feng Liu, Qian Liu

Research output: Journal Publication › Article › peer-review

39 Citations (Scopus)

Abstract

Ultrafine Ba_0.5Sr_0.5TiO₃ powders were prepared by using barium nitrate, strontium nitrate, tetrabutyl titanate, and ammonia via citrate-nitrate combustion process at low temperature (500 °C), along with the X-ray diffraction (XRD), differential scanning calorimetry (DSC)/thermogravimetry analysis (TGA) and scanning electron microscopy (SEM) analytic reports. Spark plasma sintering was carried out to obtain the ultrafine crystalline BST and to improve the dielectric properity. It was found that the sintered BST showed ultrafine crystalline microstructure. At 25 °C, the dielectric constant and dissipation factor of the sintered sample were 1533 and 0.0063 at 10 kHz.

Original language	English
Pages (from-to)	2302-2305
Number of pages	4
Journal	Materials Letters
Volume	58
Issue number	17-18
DOIs	https://doi.org/10.1016/j.matlet.2004.02.009
Publication status	Published - 1 Jul 2004
Externally published	Yes

Keywords

(Ba,Sr)TiO
Citrate-nitrate combustion preparation
Dielectrics
Spark plasma sintering

ASJC Scopus subject areas

General Materials Science
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1016/j.matlet.2004.02.009

Cite this

@article{487cc606af9a48019c594e3655f21de6,

title = "Sol-gel synthesis and spark plasma sintering of Ba0.5Sr 0.5TiO3",

abstract = "Ultrafine Ba0.5Sr0.5TiO3 powders were prepared by using barium nitrate, strontium nitrate, tetrabutyl titanate, and ammonia via citrate-nitrate combustion process at low temperature (500 °C), along with the X-ray diffraction (XRD), differential scanning calorimetry (DSC)/thermogravimetry analysis (TGA) and scanning electron microscopy (SEM) analytic reports. Spark plasma sintering was carried out to obtain the ultrafine crystalline BST and to improve the dielectric properity. It was found that the sintered BST showed ultrafine crystalline microstructure. At 25 °C, the dielectric constant and dissipation factor of the sintered sample were 1533 and 0.0063 at 10 kHz.",

keywords = "(Ba,Sr)TiO, Citrate-nitrate combustion preparation, Dielectrics, Spark plasma sintering",

author = "Cai Shen and Liu, {Qing Feng} and Qian Liu",

note = "Funding Information: This work is financially supported by the National Natural Science Foundation of China (20151003/B01) and Science and Technology Commission of Shanghai Municipality (02JC14015). We are grateful to Prof. L. D. Chen for supplying with SPS and for the useful discussion.",

year = "2004",

month = jul,

day = "1",

doi = "10.1016/j.matlet.2004.02.009",

language = "English",

volume = "58",

pages = "2302--2305",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier",

number = "17-18",

}

TY - JOUR

T1 - Sol-gel synthesis and spark plasma sintering of Ba0.5Sr 0.5TiO3

AU - Shen, Cai

AU - Liu, Qing Feng

AU - Liu, Qian

N1 - Funding Information: This work is financially supported by the National Natural Science Foundation of China (20151003/B01) and Science and Technology Commission of Shanghai Municipality (02JC14015). We are grateful to Prof. L. D. Chen for supplying with SPS and for the useful discussion.

PY - 2004/7/1

Y1 - 2004/7/1

N2 - Ultrafine Ba0.5Sr0.5TiO3 powders were prepared by using barium nitrate, strontium nitrate, tetrabutyl titanate, and ammonia via citrate-nitrate combustion process at low temperature (500 °C), along with the X-ray diffraction (XRD), differential scanning calorimetry (DSC)/thermogravimetry analysis (TGA) and scanning electron microscopy (SEM) analytic reports. Spark plasma sintering was carried out to obtain the ultrafine crystalline BST and to improve the dielectric properity. It was found that the sintered BST showed ultrafine crystalline microstructure. At 25 °C, the dielectric constant and dissipation factor of the sintered sample were 1533 and 0.0063 at 10 kHz.

AB - Ultrafine Ba0.5Sr0.5TiO3 powders were prepared by using barium nitrate, strontium nitrate, tetrabutyl titanate, and ammonia via citrate-nitrate combustion process at low temperature (500 °C), along with the X-ray diffraction (XRD), differential scanning calorimetry (DSC)/thermogravimetry analysis (TGA) and scanning electron microscopy (SEM) analytic reports. Spark plasma sintering was carried out to obtain the ultrafine crystalline BST and to improve the dielectric properity. It was found that the sintered BST showed ultrafine crystalline microstructure. At 25 °C, the dielectric constant and dissipation factor of the sintered sample were 1533 and 0.0063 at 10 kHz.

KW - (Ba,Sr)TiO

KW - Citrate-nitrate combustion preparation

KW - Dielectrics

KW - Spark plasma sintering

UR - http://www.scopus.com/inward/record.url?scp=2542427915&partnerID=8YFLogxK

U2 - 10.1016/j.matlet.2004.02.009

DO - 10.1016/j.matlet.2004.02.009

M3 - Article

AN - SCOPUS:2542427915

SN - 0167-577X

VL - 58

SP - 2302

EP - 2305

JO - Materials Letters

JF - Materials Letters

IS - 17-18

ER -