Abstract
This work is aimed to develop a parameterized time–frequency analysis method combined with vibration and acoustic measurements for gear fault diagnosis. To achieve this aim, the work introduces the combined use of the residual method and general linear chirplet transform using acoustic and vibration measurements from a single stage spur gearbox. Experimental works were undertaken on a developed gearbox test rig. It was found from experiments that despite acoustic measurements were heavily corrupted by measurement noise, the use of the combined general linear chirplet transform method provided more accurate fault severity assessment compared to other commonly used diagnostic methods: continuous wavelet transform and pseudo Wigner–Ville distribution methods. The combined general linear chirplet transform method allows an accurate determination of the angular location of gear fault and a better representation of sidebands associated with the severity level of gear fault. The results demonstrate the potential of using non-contact acoustic measurement using the combined general linear chirplet transform method as an alternative sensing method for gear condition monitoring applications.
Original language | English |
---|---|
Pages (from-to) | 36-52 |
Number of pages | 17 |
Journal | Journal of Low Frequency Noise Vibration and Active Control |
Volume | 38 |
Issue number | 1 |
DOIs | |
Publication status | Published - 1 Mar 2019 |
Keywords
- Gear
- Wigner–Ville distribution
- chirplet transform
- condition monitoring
- continuous wavelet transform
- noise
- vibration
ASJC Scopus subject areas
- Civil and Structural Engineering
- Building and Construction
- Acoustics and Ultrasonics
- Mechanics of Materials
- Geophysics
- Mechanical Engineering