Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings

X. Dai, X. Yang, J. Campbell, J. Wood

Research output: Journal PublicationArticlepeer-review

103 Citations (Scopus)

Abstract

Effects of runner systems on the mechanical strength of Al-7Si-Mg alloy castings have been investigated by employing different cross-sectional shapes of runners. Computational fluid dynamics (CFD) modelling was used to identify the flow behaviour and the oxide film distribution in the castings. The X-ray radiography was then used to examine the general distribution of defects in the castings from different running systems. Four-point bending method was applied. The scatter of bend strength results was quantified by Weibull statistics. The oxide films and casting defects existing on the fracture surface of the casting specimens were observed by scanning electron microscopy (SEM). Both of numerical and experimental results showed that the vortex-flow runner system (VR) could effectively control the ingate velocity and keep its value lower than 0.5 m s-1, avoiding the generation of surface turbulence and the consequential entrainment of oxide films. The results from both the experiment and simulation support the conclusion that the use of VR can produce castings with fewer oxide film inclusions and more reliable mechanical properties compared with the castings using conventional runner systems.

Original languageEnglish
Pages (from-to)315-325
Number of pages11
JournalMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing
Volume354
Issue number1-2
DOIs
Publication statusPublished - 15 Aug 2003
Externally publishedYes

Keywords

  • Aluminium castings
  • Bend strength
  • Casting defects
  • Computational fluid dynamics
  • Runner system design
  • Weibull statistics

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Effects of runner system design on the mechanical strength of Al-7Si-Mg alloy castings'. Together they form a unique fingerprint.

Cite this