Correlating tool wear to intact carbon fibre contacts during drilling of continuous fibre Reinforced Polymers (CFRP)

John McClelland, Adrian Murphy, Yan Jin, Saurav Goel

Research output: Journal PublicationArticlepeer-review

5 Citations (Scopus)

Abstract

Drilling holes to facilitate the mechanical joining of CFRP assemblies is a key operation for many high value products, especially in aerospace manufacturing. Tool wear continues to remain a significant operational problem and the extant research indicates that this wear initiates at the cutting edge due to the abrasive contact between the reinforcing fibres and the tool surface. While there have been efforts made to characterise and understand the wear process, the current literature lacks an explanation on the most logical influential parameters affecting it. Here, in this work, a novel method of calculating the idealised number of abrasive contacts between the reinforcing fibres of the workpiece and the tool is demonstrated. Sequentially, a systematic experimental study is designed to measure how tool wear is influenced by the calculated number of abrasive contacts and how wear shape varies, from an initial pristine cutting edge to a worn geometry. The experiments showed a consistent “waterfall” wear shape, the magnitude of which grew with the number of intact fibre-tool contacts. The study establishes that wear is focused on the flank face, while the junction with the rake face occurs at a repeatable radius in each experimental trial. The results also showed that the tool wear increases as a function of both drilled depth and drilling contact time, independent of drilling speed and feed, but notably, the wear magnitude does not scale proportionally with the number of idealised intact fibre-tool contacts.

Original languageEnglish
Pages (from-to)1418-1432
Number of pages15
JournalMaterials Today: Proceedings
Volume64
DOIs
Publication statusPublished - Jan 2022
Externally publishedYes

Keywords

  • Abrasion
  • CFRP
  • Drilling
  • Edge rounding
  • Thermal Imaging
  • Tool wear

ASJC Scopus subject areas

  • General Materials Science

Fingerprint

Dive into the research topics of 'Correlating tool wear to intact carbon fibre contacts during drilling of continuous fibre Reinforced Polymers (CFRP)'. Together they form a unique fingerprint.

Cite this