Abstract
The aim of the present research was to investigate the effect of laser surface treatment on the thermal shock behavior of plasma sprayed Al 2 O 3 /YSZ multilayer thermal barrier coatings. In this regard, specimens of Inconel 718 were sprayed with Ni–22Cr–10Al–Y bond coat and Al 2 O 3 /YSZ top coat using an atmospheric plasma spraying approach. Then, top surfaces of specimens were under exposed to Nd-YAG laser radiation and thereby were glazed. Thermal stabilities of both coatings were evaluated by rising the environment temperature up to 1000 °C, keeping at this temperature for 15 min, and also rapid cooling of specimens in cold water. Using FESEM with EDS and XRD, the microstructure and morphology observations, elemental investigations and also phase identification were carried out. Findings displayed that both sprayed and glazed coatings were damaged as a spallation of top coats. Furthermore, by checking the life-time of coatings, the number of thermal cycles led to 20% destruction of top surfaces of coatings, increased from 232 cycles in sprayed coating to 325 cycles in laser glazed Al 2 O 3 /YSZ multilayer coating which displayed 40% improvement of thermal shock resistance after laser glazing process. This enhancement in resistance to thermal shock was due to strain adaptability improvement via a network of segmented cracks on the top surface produced by laser glazing process.
| Original language | English |
|---|---|
| Pages (from-to) | 62-69 |
| Number of pages | 8 |
| Journal | Surface and Coatings Technology |
| Volume | 366 |
| DOIs | |
| Publication status | Published - 25 May 2019 |
| Externally published | Yes |
Keywords
- Air plasma spray coating
- Al O /YSZ multilayer coating
- Laser glazing
- Thermal barrier coating
- Thermal shock
ASJC Scopus subject areas
- General Chemistry
- Condensed Matter Physics
- Surfaces and Interfaces
- Surfaces, Coatings and Films
- Materials Chemistry