Proportional Step Perturbation Method MPPT for Boost Circuit of TEG

Feng Ji; John Xu

doi:10.1007/978-981-15-8450-3_6

Proportional Step Perturbation Method MPPT for Boost Circuit of TEG

Feng Ji
, John Xu

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

120 Downloads (Pure)

Abstract

In order to improve the working efficiency of thermoelectric generation (TEG), maximum power point tracking (MPPT) is usually used in the system. The perturbation method is a traditional method for MPPT. The perturbation of the step length is normally fixed. It will lead to be not accurate enough if the step size is too big. If the step size is too small, it will lead to take a long time. Therefore, the proportional step perturbation method MPPT is proposed in the paper. This method can be implemented by using large steps at the beginning to save time. When it is near the maximum power point, small steps can be used to achieve the accurate purpose. The derivation of the method has been described in details in the paper. The simulation model is established based on Matlab. The simulation results show that the method is feasible.

Original language	English
Title of host publication	Proceedings of 2020 Chinese Intelligent Systems Conference - Volume I
Editors	Yingmin Jia, Weicun Zhang, Yongling Fu
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	48-56
Number of pages	9
ISBN (Print)	9789811584497
DOIs	https://doi.org/10.1007/978-981-15-8450-3_6
Publication status	Published - 2021
Event	Chinese Intelligent Systems Conference, CISC 2020 - Shenzhen, China Duration: 24 Oct 2020 → 25 Oct 2020

Publication series

Name	Lecture Notes in Electrical Engineering
Volume	705 LNEE
ISSN (Print)	1876-1100
ISSN (Electronic)	1876-1119

Conference

Conference	Chinese Intelligent Systems Conference, CISC 2020
Country/Territory	China
City	Shenzhen
Period	24/10/20 → 25/10/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Free Keywords

Boost
MPPT
Proportional step perturbation method

ASJC Scopus subject areas

Industrial and Manufacturing Engineering

Access to Document

10.1007/978-981-15-8450-3_6

Proportional step perturbation method MPPT for boost circuit of TEGAccepted author manuscript, 1.16 MBLicence: CC BY

Cite this

@inproceedings{0704a6b0238a4208aac34bca42023355,

title = "Proportional Step Perturbation Method MPPT for Boost Circuit of TEG",

abstract = "In order to improve the working efficiency of thermoelectric generation (TEG), maximum power point tracking (MPPT) is usually used in the system. The perturbation method is a traditional method for MPPT. The perturbation of the step length is normally fixed. It will lead to be not accurate enough if the step size is too big. If the step size is too small, it will lead to take a long time. Therefore, the proportional step perturbation method MPPT is proposed in the paper. This method can be implemented by using large steps at the beginning to save time. When it is near the maximum power point, small steps can be used to achieve the accurate purpose. The derivation of the method has been described in details in the paper. The simulation model is established based on Matlab. The simulation results show that the method is feasible.",

keywords = "Boost, MPPT, Proportional step perturbation method",

author = "Feng Ji and John Xu",

note = "Publisher Copyright: {\textcopyright} 2021, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.; Chinese Intelligent Systems Conference, CISC 2020 ; Conference date: 24-10-2020 Through 25-10-2020",

year = "2021",

doi = "10.1007/978-981-15-8450-3\_6",

language = "English",

isbn = "9789811584497",

series = "Lecture Notes in Electrical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "48--56",

editor = "Yingmin Jia and Weicun Zhang and Yongling Fu",

booktitle = "Proceedings of 2020 Chinese Intelligent Systems Conference - Volume I",

address = "Germany",

}

Ji, F & Xu, J 2021, Proportional Step Perturbation Method MPPT for Boost Circuit of TEG. in Y Jia, W Zhang & Y Fu (eds), Proceedings of 2020 Chinese Intelligent Systems Conference - Volume I. Lecture Notes in Electrical Engineering, vol. 705 LNEE, Springer Science and Business Media Deutschland GmbH, pp. 48-56, Chinese Intelligent Systems Conference, CISC 2020, Shenzhen, China, 24/10/20. https://doi.org/10.1007/978-981-15-8450-3_6

Proportional Step Perturbation Method MPPT for Boost Circuit of TEG. / Ji, Feng; Xu, John.
Proceedings of 2020 Chinese Intelligent Systems Conference - Volume I. ed. / Yingmin Jia; Weicun Zhang; Yongling Fu. Springer Science and Business Media Deutschland GmbH, 2021. p. 48-56 (Lecture Notes in Electrical Engineering; Vol. 705 LNEE).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Proportional Step Perturbation Method MPPT for Boost Circuit of TEG

AU - Ji, Feng

AU - Xu, John

PY - 2021

Y1 - 2021

N2 - In order to improve the working efficiency of thermoelectric generation (TEG), maximum power point tracking (MPPT) is usually used in the system. The perturbation method is a traditional method for MPPT. The perturbation of the step length is normally fixed. It will lead to be not accurate enough if the step size is too big. If the step size is too small, it will lead to take a long time. Therefore, the proportional step perturbation method MPPT is proposed in the paper. This method can be implemented by using large steps at the beginning to save time. When it is near the maximum power point, small steps can be used to achieve the accurate purpose. The derivation of the method has been described in details in the paper. The simulation model is established based on Matlab. The simulation results show that the method is feasible.

AB - In order to improve the working efficiency of thermoelectric generation (TEG), maximum power point tracking (MPPT) is usually used in the system. The perturbation method is a traditional method for MPPT. The perturbation of the step length is normally fixed. It will lead to be not accurate enough if the step size is too big. If the step size is too small, it will lead to take a long time. Therefore, the proportional step perturbation method MPPT is proposed in the paper. This method can be implemented by using large steps at the beginning to save time. When it is near the maximum power point, small steps can be used to achieve the accurate purpose. The derivation of the method has been described in details in the paper. The simulation model is established based on Matlab. The simulation results show that the method is feasible.

KW - Boost

KW - MPPT

KW - Proportional step perturbation method

UR - https://www.scopus.com/pages/publications/85092144915

U2 - 10.1007/978-981-15-8450-3_6

DO - 10.1007/978-981-15-8450-3_6

M3 - Conference contribution

AN - SCOPUS:85092144915

SN - 9789811584497

T3 - Lecture Notes in Electrical Engineering

SP - 48

EP - 56

BT - Proceedings of 2020 Chinese Intelligent Systems Conference - Volume I

A2 - Jia, Yingmin

A2 - Zhang, Weicun

A2 - Fu, Yongling

PB - Springer Science and Business Media Deutschland GmbH

T2 - Chinese Intelligent Systems Conference, CISC 2020

Y2 - 24 October 2020 through 25 October 2020

ER -

Proportional Step Perturbation Method MPPT for Boost Circuit of TEG

Abstract

Publication series

Conference

UN SDGs

Free Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this