Identification of vehicle suspension parameters by design optimization

The design of a vehicle suspension system through simulation requires accurate representation of the design parameters. These parameters are usually difficult to Measure or sometimes unavailable. This article proposes an efficient approach to identify the unknown parameters through optimization based on experimental results, where the covariance Matrix adaptation-evolutionary strategy (CmA-es) is utilized to improve the simulation and experimental results against the kinematic and compliance tests. This speeds up the design and development cycle by recovering all the unknown data with respect to a set of kinematic Measurements through a single optimization process. A case study employing a McPherson strut suspension system is Modelled in a Multi-body dynamic system. Three kinematic and compliance tests are examined, namely, vertical parallel wheel travel, opposite wheel travel and single wheel travel. The problem is formulated as a Multi-objective optimization problem with 40 objectives and 49 design parameters. A hierarchical clustering Method based on global sensitivity analysis is used to reduce the number of objectives to 30 by grouping correlated objectives together. Then, a dynamic summation of rank value is used as pseudo-objective functions to reformulate the Multi-objective optimization to a single-objective optimization problem. The optimized results show a significant improvement in the correlation between the simulated Model and the experimental Model. Once accurate representation of the vehicle suspension Model is achieved, further analysis, such as ride and handling performances, can be implemented for further optimization.