Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone

Cijun Shuai; Yi Nie; Chengde Gao; Huanlong Hu; Jingyu Zhuang; Zhongzheng Mao; Shuping Peng

doi:10.4028/www.scientific.net/AMM.88-89.199

Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone

Cijun Shuai
, Yi Nie
, Chengde Gao
, Huanlong Hu
, Jingyu Zhuang
, Zhongzheng Mao
, Shuping Peng^*

^*Corresponding author for this work

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

Abstract

An open motion control software for a novel selective laser sintering system has been developed to fabricate a three-dimensional porous artificial bone with complex shape. It adopts the library functions provided by a motion control card in Delphi 2006. It focuses on the realizations of control for 'sintering a dot', 'sintering a line' and 'sintering a surface' aiming at the characteristics of selective laser sintering. A problem that the transmission length of interpolation commands can not exceed certain value at a time due to constriction by the register capacity of the motion control card has been resolved. The control software has been successfully used in the experiment of laser sintering for fabricating artificial bone. The results show that the selective laser sintering system has high stability and accuracy.

Original language	English
Title of host publication	Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011
Pages	199-203
Number of pages	5
DOIs	https://doi.org/10.4028/www.scientific.net/AMM.88-89.199
Publication status	Published - 2011
Externally published	Yes
Event	International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011 - Hangzhou, China Duration: 13 Sept 2011 → 16 Sept 2011

Publication series

Name	Applied Mechanics and Materials
Volume	88-89
ISSN (Print)	1660-9336
ISSN (Electronic)	1662-7482

Conference

Conference	International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011
Country/Territory	China
City	Hangzhou
Period	13/09/11 → 16/09/11

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Free Keywords

Control software
Laser sintering
Rapid prototyping

ASJC Scopus subject areas

General Engineering

Access to Document

10.4028/www.scientific.net/AMM.88-89.199

Cite this

Shuai, C., Nie, Y., Gao, C., Hu, H., Zhuang, J., Mao, Z., & Peng, S. (2011). Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone. In Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011 (pp. 199-203). (Applied Mechanics and Materials; Vol. 88-89). https://doi.org/10.4028/www.scientific.net/AMM.88-89.199

@inproceedings{d4c7b87af6724332b5e546b5c1944bc0,

title = "Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone",

abstract = "An open motion control software for a novel selective laser sintering system has been developed to fabricate a three-dimensional porous artificial bone with complex shape. It adopts the library functions provided by a motion control card in Delphi 2006. It focuses on the realizations of control for 'sintering a dot', 'sintering a line' and 'sintering a surface' aiming at the characteristics of selective laser sintering. A problem that the transmission length of interpolation commands can not exceed certain value at a time due to constriction by the register capacity of the motion control card has been resolved. The control software has been successfully used in the experiment of laser sintering for fabricating artificial bone. The results show that the selective laser sintering system has high stability and accuracy.",

keywords = "Control software, Laser sintering, Rapid prototyping",

author = "Cijun Shuai and Yi Nie and Chengde Gao and Huanlong Hu and Jingyu Zhuang and Zhongzheng Mao and Shuping Peng",

year = "2011",

doi = "10.4028/www.scientific.net/AMM.88-89.199",

language = "English",

isbn = "9783037852361",

series = "Applied Mechanics and Materials",

pages = "199--203",

booktitle = "Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011",

note = "International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011 ; Conference date: 13-09-2011 Through 16-09-2011",

}

Shuai, C, Nie, Y, Gao, C, Hu, H, Zhuang, J, Mao, Z & Peng, S 2011, Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone. in Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011. Applied Mechanics and Materials, vol. 88-89, pp. 199-203, International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011, Hangzhou, China, 13/09/11. https://doi.org/10.4028/www.scientific.net/AMM.88-89.199

Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone. / Shuai, Cijun; Nie, Yi; Gao, Chengde et al.
Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011. 2011. p. 199-203 (Applied Mechanics and Materials; Vol. 88-89).

Research output: Chapter in Book/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone

AU - Shuai, Cijun

AU - Nie, Yi

AU - Gao, Chengde

AU - Hu, Huanlong

AU - Zhuang, Jingyu

AU - Mao, Zhongzheng

AU - Peng, Shuping

PY - 2011

Y1 - 2011

N2 - An open motion control software for a novel selective laser sintering system has been developed to fabricate a three-dimensional porous artificial bone with complex shape. It adopts the library functions provided by a motion control card in Delphi 2006. It focuses on the realizations of control for 'sintering a dot', 'sintering a line' and 'sintering a surface' aiming at the characteristics of selective laser sintering. A problem that the transmission length of interpolation commands can not exceed certain value at a time due to constriction by the register capacity of the motion control card has been resolved. The control software has been successfully used in the experiment of laser sintering for fabricating artificial bone. The results show that the selective laser sintering system has high stability and accuracy.

AB - An open motion control software for a novel selective laser sintering system has been developed to fabricate a three-dimensional porous artificial bone with complex shape. It adopts the library functions provided by a motion control card in Delphi 2006. It focuses on the realizations of control for 'sintering a dot', 'sintering a line' and 'sintering a surface' aiming at the characteristics of selective laser sintering. A problem that the transmission length of interpolation commands can not exceed certain value at a time due to constriction by the register capacity of the motion control card has been resolved. The control software has been successfully used in the experiment of laser sintering for fabricating artificial bone. The results show that the selective laser sintering system has high stability and accuracy.

KW - Control software

KW - Laser sintering

KW - Rapid prototyping

UR - https://www.scopus.com/pages/publications/80052927063

U2 - 10.4028/www.scientific.net/AMM.88-89.199

DO - 10.4028/www.scientific.net/AMM.88-89.199

M3 - Conference contribution

AN - SCOPUS:80052927063

SN - 9783037852361

T3 - Applied Mechanics and Materials

SP - 199

EP - 203

BT - Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011

T2 - International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2011

Y2 - 13 September 2011 through 16 September 2011

ER -

Control software development of a novel rapid prototype laser sintering system for fabricating artificial bone

Abstract

Publication series

Conference

UN SDGs

Free Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this