Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Liu Zhu; Anam Sana; Muhammad Tariq Qamar; Ali Bahadur; Guocong Liu; Mohammad Aslam; Ammar Zidan; İsmail Seçkin Çardaklı; Shahid Iqbal; Sajid Mahmood; Muhammad Saad; Khalid M. Alotaibi

doi:10.1038/s41598-025-28805-w

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Liu Zhu
, Anam Sana
, Muhammad Tariq Qamar
, Ali Bahadur^*
, Guocong Liu^*
, Mohammad Aslam
, Ammar Zidan
, İsmail Seçkin Çardaklı
, Shahid Iqbal^*
, Sajid Mahmood^*
, Muhammad Saad^*
, Khalid M. Alotaibi

^*Corresponding author for this work

CBI Green Chemicals and Energy Centre

Research output: Journal Publication › Comment/debate

Abstract

Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition q_m (mg g⁻¹) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO₃/TiO₂ Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe₂O₃/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe₃O₄/Ti₃C₂ Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe₂O₃ Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition q_m (mg g⁻¹) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO₃/TiO₂ Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe₂O₃/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe₃O₄/Ti₃C₂ Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe₂O₃ Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

Original language	English
Article number	40907
Journal	Scientific Reports
Volume	15
Issue number	1
DOIs	https://doi.org/10.1038/s41598-025-28805-w
Publication status	Published - Dec 2025

ASJC Scopus subject areas

General

Access to Document

10.1038/s41598-025-28805-w

Fingerprint

Dive into the research topics of 'Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)'. Together they form a unique fingerprint.

Cite this

Zhu, L., Sana, A., Qamar, M. T., Bahadur, A., Liu, G., Aslam, M., Zidan, A., Çardaklı, İ. S., Iqbal, S., Mahmood, S., Saad, M., & Alotaibi, K. M. (2025). Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7). Scientific Reports, 15(1), Article 40907. https://doi.org/10.1038/s41598-025-28805-w

@article{f853fc8bb1d34b7baecda26e88fa2234,

title = "Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)",

abstract = "Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.",

author = "Liu Zhu and Anam Sana and Qamar, \{Muhammad Tariq\} and Ali Bahadur and Guocong Liu and Mohammad Aslam and Ammar Zidan and {\c C}ardaklı, \{İsmail Se{\c c}kin\} and Shahid Iqbal and Sajid Mahmood and Muhammad Saad and Alotaibi, \{Khalid M.\}",

note = "Publisher Copyright: {\textcopyright} The Author(s) 2025.",

year = "2025",

month = dec,

doi = "10.1038/s41598-025-28805-w",

language = "English",

volume = "15",

journal = "Scientific Reports",

issn = "2045-2322",

publisher = "Nature Research",

number = "1",

}

Zhu, L, Sana, A, Qamar, MT, Bahadur, A, Liu, G, Aslam, M, Zidan, A, Çardaklı, İS, Iqbal, S, Mahmood, S, Saad, M & Alotaibi, KM 2025, 'Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)', Scientific Reports, vol. 15, no. 1, 40907. https://doi.org/10.1038/s41598-025-28805-w

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7). / Zhu, Liu; Sana, Anam; Qamar, Muhammad Tariq et al.
In: Scientific Reports, Vol. 15, No. 1, 40907, 12.2025.

Research output: Journal Publication › Comment/debate

TY - JOUR

T1 - Author Correction

T2 - Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

AU - Zhu, Liu

AU - Sana, Anam

AU - Qamar, Muhammad Tariq

AU - Bahadur, Ali

AU - Liu, Guocong

AU - Aslam, Mohammad

AU - Zidan, Ammar

AU - Çardaklı, İsmail Seçkin

AU - Iqbal, Shahid

AU - Mahmood, Sajid

AU - Saad, Muhammad

AU - Alotaibi, Khalid M.

PY - 2025/12

Y1 - 2025/12

N2 - Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

AB - Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

UR - https://www.scopus.com/pages/publications/105022522366

U2 - 10.1038/s41598-025-28805-w

DO - 10.1038/s41598-025-28805-w

M3 - Comment/debate

C2 - 41266759

AN - SCOPUS:105022522366

SN - 2045-2322

VL - 15

JO - Scientific Reports

JF - Scientific Reports

IS - 1

M1 - 40907

ER -

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this